Datasheet4U Logo Datasheet4U.com

M61301SP - BUS CONTROLLED 3CH VIDEO PRE-AMP FOR CRT DISPLAY MONITOR

Key Features

  • Frequency Band Width: RGB 150 MHz (at -3dB) OSD 80 MHz Input : RGB 0.7 Vp-p (Typ) OSD light 4 Vp-p minimum (positive) OSD harf 2.5Vp-p minimum (positive) 3.0Vp-p maximum (positive) BLK(for OSD) 3 Vp-p minimum (positive) Retrace BLK 3 Vp-p minimum (positive) Output : RGB 5.5 Vp-p (maximum) OSD 5 Vp-p (maximum) Main Contrast and Sub Contrast can be controlled by I2C Bus. Video response can be controlled by I2C Bus. Brightness OSD IN (R) OSD IN (B) OSD IN (G) OSD BLK IN INPUT (R) VCC 12V NC INPUT.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M61311SP (M61311SP / M61316SP) I2C BUS CONTROLLED VIDEO PRE-AMP Mitsubishi Electric Semiconductor
M61314SP I2C BUS CONTROLLED VIDEO PRE-AMP Mitsubishi Electric Semiconductor
M61316SP (M61311SP / M61316SP) I2C BUS CONTROLLED VIDEO PRE-AMP Mitsubishi Electric Semiconductor
M61006FP DISTANCE DETECTION SIGNAL PROCESSING FOR 3 V SUPPLY VOLTAGE Hitachi Semiconductor
M61006FP DISTANCE DETECTION SIGNAL PROCESSING FOR 3 V SUPPLY VOLTAGE Hitachi

Other Datasheets by Mitsubishi Electric

Part Number Description
M61323FP WIDE FREQUENCY BAND ANALOG SWITCH
M61323SP WIDE FREQUENCY BAND ANALOG SWITCH
M61016F BUILTIN 2-CHANNEL SPD SENSOR DETECT AMOUNT OF LIGHT
M61018 MOTOR DRIVER FOR CAMERA
M61018GP MOTOR DRIVER FOR CAMERA

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MITSUBISHI< LINEAR IC > M61301SP BUS CONTROLLED 3CH VIDEO PRE-AMP FOR CRT DISPLAY MONITOR DISCRIPTION M61301SP is Semiconductor Integrated Circuit for CRT Display Monitor. It includes OSD Blanking,OSD Mixing,Retrace Blanking,Wide Band Amplifre,Brightness Control. Main/Sub Contrast and OSD AdjustFunction can be controlled by I2C Bus. PIN CONFIGURATION FEATURES Frequency Band Width: RGB 150 MHz (at -3dB) OSD 80 MHz Input : RGB 0.7 Vp-p (Typ) OSD light 4 Vp-p minimum (positive) OSD harf 2.5Vp-p minimum (positive) 3.0Vp-p maximum (positive) BLK(for OSD) 3 Vp-p minimum (positive) Retrace BLK 3 Vp-p minimum (positive) Output : RGB 5.5 Vp-p (maximum) OSD 5 Vp-p (maximum) Main Contrast and Sub Contrast can be controlled by I2C Bus. Video response can be controlled by I2C Bus.