Datasheet4U Logo Datasheet4U.com

M61508FP - THE ELECTRIC VOLUME of BUILD-IN NON FADER VOLUME with TONE CONTROL

General Description

Pin No.

Signal Ground of IC.

Grounding about 10uF Positive Input pin of Differential Amp.

Key Features

  • This IC is unnecessary for outside putting CR by using SCF for Loudness and Tone Control. Bass : +16dB to -12dB/2dBstep. f0,Q=variable. f0=50Hz,80Hz,120Hz Q=1,1.25,1.5,2 Mid : +12dB to -12dB/2dBstep. f0,Q=variable. f0=700Hz,1KHz,2KHz,10KHz Q=1.5,2 Treble : +12dB to -12dB/2dBstep. f0=variable. f0=8KHz,12KHz Loudness : f0=variable. f0=60Hz,80Hz,100Hz Build-in Non Fader Volume +12dB to -12dB /2dB step, - dB Build-in Zero-Crossing Detector Circuit for Changing Noise Measure. Build-in Differential In.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
M61501FP AUDIO SIGNAL PROCESSOR Renesas Technology
M61510AFP Sound Controller Renesas Technology
M61515FP TONE CONTROL/VOLUME CONTROL Mitsubishi Electric Semiconductor
M61516FP SOUND PROCESSOR ICs 7.1ch ELECTRONIC VOLUME Mitsubishi Electric Semiconductor
M61518FP AUDIO SIGNAL PROCESSOR Mitsubishi Electric Semiconductor

Other Datasheets by Mitsubishi Electric

Part Number Description
M61500FP TONE CONTROL/VOLUME CONTROL
M61503 TONE CONTROL/VOLUME CONTROL
M61503FP TONE CONTROL/VOLUME CONTROL
M61504 DIGITAL SOUND CONTROLLER WITH SURROUND
M61504FP DIGITAL SOUND CONTROLLER WITH SURROUND

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MITSUBISHI SOUND PROCESSOR ICs M61508FP THE ELECTRIC VOLUME of BUILD-IN NON FADER VOLUME with TONE CONTROL APPLICATION This IC can be used Analog Signal processing of Power Amp.front stage This IC can be used Car Audio System,Home Audio System and TV. FEATURES This IC is unnecessary for outside putting CR by using SCF for Loudness and Tone Control. Bass : +16dB to -12dB/2dBstep. f0,Q=variable. f0=50Hz,80Hz,120Hz Q=1,1.25,1.5,2 Mid : +12dB to -12dB/2dBstep. f0,Q=variable. f0=700Hz,1KHz,2KHz,10KHz Q=1.5,2 Treble : +12dB to -12dB/2dBstep. f0=variable. f0=8KHz,12KHz Loudness : f0=variable. f0=60Hz,80Hz,100Hz Build-in Non Fader Volume +12dB to -12dB /2dB step, - dB Build-in Zero-Crossing Detector Circuit for Changing Noise Measure.