MF-156DS-TR123-052 Datasheet | Mitsubishi Electric

DESCRIPTION This product is designed to provide high optical performance for SDH STM-1/SONET OC-3. Transmitter uses uncooled laser in a hermetic pigtail coaxial module with drivered by specific integrated circuit. Receiver uses PIN preamp in a hermetic pigtail coaxial module and integrated circuits for reshaping, retiming and regenerating optical signal. FEATURES Tx + Rx bined Full SONET/SDH line up Low voltage, low power consumption, low cost 20-PIN DIP with fiber pigtail Single +3.3V power supply and P-ECL patible input and output Temp range:-40 to 85 ° C Clock recovery APPLICATION Short haul and long haul telemunication systems for SDH STM-1 / SONET OC-3. ABSOLUTE MAXIMUM RATINGS Stress below listed absolute maximum rating may cause permanent damage to the transceiver. Th is is a stress o nly and functional operation of the transceiver at these or any other conditions in excess of those given in the operational sections of this data sheet is not implied. Exposure to Absolute Maximum Rating for extended periods may affect transceiver reliability. (TC=25° C) Parameter Supply voltage PECL high output current PECL input voltage Storage temperature Operating case temperature Soldering Temperature Soldering Time Relative humidity(non condensation) Fiber bend radius Symbol Vcc Tstg Tc r F Rating 5.0 30 0 to Vcc -40 to 85 -40 to 85 +250 10 5 to 85 30 Unit V m A V °C °C °C sec % mm MITSUBISHI (OPTICAL DEVICES) MF-156DS-TR123-030/040/050 SONET/SDH TRANSCEIVER ELECTRICAL CHARACTERISTICS All parameters are specified over the operating case temperature. Measurement conditions are at 155.52Mb/s+/-20ppm, NRZ PN223 -1 and 50%duty cycle data signal. Vcc=+3.3V+/-5%, Tc=-40 to 85 ° C, Using a PRBS 2 23 -1 pattern with a 50% Mark ratio, unless otherwise noted. Transmitter Parameters Supply voltage Power consumption Input voltage Transmitter disable voltage Transmitter enable voltage Laser bias monitor voltage Laser backface monitor voltage Laser bias monitor and backface...