MF-2500DS-R14-201 Datasheet | Mitsubishi Electric

DESCRIPTION This product is designed to provide high optical performance for SDH STM-16/SONET OC-48. Transmitter uses uncooled laser module with drivered by specific integrated circuit. Receiver uses PD or APD preamp-module and integrated circuits for reshaping, retiming and regenerating optical signal. 2.5Gb/s ATM LAN and ATM switching systems. FEATURES Full SONET/SDH line up Low cost pact, low power -5.2 V,+5V power supply, DC/DC converter built in for Rx Case Temp. Range: Class 1; -5 to +75° C / Class 2; -40 to +85° C Clock recovery Multi source APPLICATION Short haul and long haul telemunication systems for SDH STM-16 / SONET OC-48. ABSOLUTE MAXIMUM RATINGS Stress below listed absolute maximum rating may cause permanent damage to the module. Th is is a stress o nly and functional operation of the module at these or any other conditions in excess of those given in the operational sections of this data sheet . Exposure to Absolute Maximum Rating for extended periods may affect module reliability. Tc=25° C Parameters Symbol Vcc Supply voltage Vee High output current Input voltage Storage temperature Operating case temperature Soldering Temperature Soldering Time Relative humidity(non condensation) Fiber bend radius Tstg Tc -6.0 TBD TBD -40 to +85 class 1:-5 to +75 class 2:-40 to +85 +260 10 10 to 80 32 V m A V Ratings +6.0 Unit V °C °C °C sec % mm MITSUBISHI (OPTICAL DEVICES) MF-2500DS-T12-18x/19x/20x/21x MF-2500DS-R13-18x MF-2500DS-R14-19x/20x/21x SONET/SDH TRANSMITTER & RECIEVER ELECTRICAL/OPTICAL CHARACTERISTICS (TLD=25°C, unless otherwise noted) All parameters are specified over the operating case temperature. 23 Measurement conditions are at 2488.32Mb/s +/-20ppm, NRZ PN2 -1 and 50% duty cycle data signal. Vcc=+5.0V+/-5%, Vee=-5.2V+/-5%, and for Transmitter. note : Vcc-Vee ; with Vcc at +5V Vee must be at 0V ; with Vee at -5.5V Vcc must be at 0V note : Internally AC coupled with 50ohm internal termination Transmitter class1 : -5°C to +75°C Supply...