MF-622DF-T12-462 Datasheet | Mitsubishi Electric

DESCRIPTION Transmitter uses uncooled laser in a hermetic pigtail coaxial module with drivered by specific integrated circuit. Receiver uses PIN preamp in a hermetic pigtail coaxial module and integrated circuits for reshaping, retiming and regenerating optical signal. FEATURES SONET,SDH system from intra-office to longleach application fully line up Low cost and Low power consumption Multisourced 20-Pin DIP with pigtail fiber Single +5V power supply and P-ECL patible input and output Operating case temperature range -40 to 85 ° C. With clock recovery and digital alarm function APPLICATION Short haul and long haul telemunication systems for SDH STM-4 / SONET OC-12. ABSOLUTE MAXIMUM RATINGS Stress below listed absolute maximum rating may cause permanent damage to the module. This is a stress only and functional operation of the module at these or any other conditions in excess of those given in the operational sections of this data sheet. Exposure to Absolute Maximum Rating for extended periods may affect module reliability. Ta=25° C Parameters Supply voltage PECL high output current PECL input voltage Storage temperature Operating case temperature Soldering Temperature Soldering Time Relative humidity(non condensation) Fiber bend radius from package Symbol Vcc Tstg Tc r F Ratings +6 to 0 -50 to 0 0 to Vcc+0.4 -40 to 85 -40 to 85 +260 10 10 to 80 32 Unit V m A V °C °C °C sec % mm MITSUBISHI (OPTICAL DEVICES) MF-622DS-T12-43x/45x/46x MF-622DS-R13-24x SONET/SDH TRANSMITTER & RECEIVER ELECTRICAL CHARACTERISTICS All parameters are specified over the operating case temperature. Measurement conditions are at 622.08Mb/s+/-20ppm, NRZ PN223 -1 and 50%duty cycle data signal. The DATA input/output and CLOCK output signal levels are PECL patible. The transmitter disable input signal level is CMOS/TTL patible. The Signal Detect output signal level is PECL level patible. Transmitter Parameters Supply voltage Power consumption PECL input voltage Transmitter Disable voltage...