Datasheet4U Logo Datasheet4U.com

MM1375 - RGB Video Amplifier for Monitors

General Description

Pin no.

Key Features

  • 1. 2. 3. 4. 5. 6. 7. 8. Low power consumption (VCC=8V, ICC=68mA) Smaller capacity for clamping capacitor (0.1µF) High band video amp 100MHZ @-3dB Matched (±0.1dB) contrast adjustment attenuators built in Built-in cutoff and brightness adjustment input comparators using external gate control Built-in high input impedance DC contrast control, 0~4V Output blanking function Output can drive hybrid or discrete CRT driver directly Package SDIP-22A.

📥 Download Datasheet

Datasheet Details

Part number MM1375
Manufacturer Mitsumi Electric
File Size 128.36 KB
Description RGB Video Amplifier for Monitors
Datasheet download datasheet MM1375 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MM1376 IC for Headphone Stereos ETC
MM137N04K MOSFET MacMic
MM1302A Protection of Lithium Ion Batteries (two cells in series) MITSUMI
MM1302E Protection of Lithium Ion Batteries (two cells in series) MITSUMI
MM1302F Protection of Lithium Ion Batteries (two cells in series) MITSUMI

Other Datasheets by Mitsumi Electric

Part Number Description
MM1377 Monolithic IC
MM1378 Monolithic IC
MM1320 Microminiature Low-Noise / Low-Saturation Three-Pin Regulator
MM1323 LCD Interface Monolithic IC
MM1326 (MM1326/1354/1369) Q Xpander Processors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MITSUMI RGB Video Amplifier for Monitors MM1375 RGB Video Amplifier for Monitors Monolithic IC MM1375 Outline This IC is a wideband RGB video amplifier with DC control, developed for use in monitors. It has a differential input comparator for brightness adjustment, and three matched DC control attenuators for contrast adjustment. All DC control input is high impedance, and the operating range is set for easy interface with serial bus control systems, at 0~4V. Also, the building-in blanking circuit clamps video output to less than 0.2V during blanking, enabling blanking on the CRT cathode. Features 1. 2. 3. 4. 5. 6. 7. 8. Low power consumption (VCC=8V, ICC=68mA) Smaller capacity for clamping capacitor (0.1µF) High band video amp 100MHZ @-3dB Matched (±0.