1PMT5917BT3 Datasheet | Motorola Semiconductor

Features : - Voltage Range - 3.3 to 91 V - ESD Rating of Class 3 (> 16 k V) per Human Body Model - Low Profile - maximum height of 1.1mm - Integral Heat Sink/Locking Tabs - Full metallic bottom eliminates flux entrapment - Small Footprint - Footprint area of 8.45mm2 - Supplied in 12mm tape and reel - 12,000 units per reel - Powermite is JEDEC Registered as DO- 216AA 1PMT5913BT3 through 1PMT5948BT3 PLASTIC SURFACE MOUNT ZENER DIODES 2.5 WATTS 3.3- 91 VOLTS 2 CASE 457- 01 PLASTIC 2 1: CATHODE 2: ANODE MAXIMUM RATINGS Rating DC Power Dissipation @ TL = 75°C, Measured at Zero Lead Length Derate above 75°C DC Power Dissipation @ TA = 25°C(1) Derate above 25°C Thermal Resistance from Junction to Lead Thermal Resistance from Junction to Ambient Operating and Storage Junction Temperature Range Typical Ppk Dissipation @ TL < 25°C, (PW- 10/1000 µs per Figure 8)(2) Typical Ppk Dissipation @ TL < 25°C, (PW- 8/20 µs per Figure 9)(2) Symbol °PD° °PD° RθJL RθJA TJ, Tstg Ppk Ppk Value 2.5 40 380 2.8 26 324 - 65 to +150 200 1000 Unit °Watts° m W/°C °m W m W/°C °C/W °C/W °C Watts Watts (1)FR4 Board, within 1” to device, using Motorola minimum remended footprint, as shown in case 403A outline dimensions spec. (2)Non- repetitive current pulse. This document contains preview information only and is subject to change without notice. Powermite is a registered trademark of Microsemi Corporation. Thermal Clad is a trademark of the Bergquist pany. © Motorola, Inc. 1996 1PMT5913BT3 through 1PMT5948BT3 MOTOROLA 1 ELECTRICAL CHARACTERISTICS (VF = 1.5 Volts Max @ IF = 200 m Adc for all types.) Nominal Zener Voltage VZ @ IZT Volts (Note 1) 3.3 3.6 3.9 4.3 Test Current IZT m A 113.6 104.2 96.1 87.2 Max Zener Impedance (Note 2) ZZT @ IZT Ohms 10 9 7.5 6 ZZK Ohms 500 500 500 500 @ IZK m A 1 1 1 1 Max Reverse Leakage Current IR µA 100 75 25 5 @ VR Volts 1 1 1 1 Maximum DC Zener Current IZM m Adc 454 416 384 348 Device- 1PMT5913BT3 1PMT5914BT3 1PMT5915BT3 1PMT5916BT3 Device Marking 913B 914B 915B...