Datasheet4U Logo Datasheet4U.com

33793 - Distributed System Interface (DSI)

Description

Pin Pin Name BUSRTN I/O0 AGND I/O1 I/O3 NC I/O2 LOGOUT REGOUT H_CAP BUSIN BUSOUT Description This pin provides the common return for power and signalling.

This pin can be used to provide a logic level output, a logic input, or an analog-to-digital (A/D) input.

Features

  • 4-Channel, 8-Bit Analog-to-Digital Converter (ADC).
  • 4 Pins Configurable as Analog or Logic Inputs or as Logic Outputs.
  • Provides Regulated +5.0 V Output for Sensor Power from Bus.
  • Additional High-Drive Logic Output.
  • Undervoltage Fault Detection and Signaling.
  • On-Board Clock (No External Elements Required).
  • Field-Programmable Address.
  • Default and Field-Programmable as a DSI Daisy Chain Device.
  • Recognizes Reverse Init.

📥 Download Datasheet

Datasheet preview – 33793

Datasheet Details

Part number 33793
Manufacturer Motorola Inc
File Size 640.16 KB
Description Distributed System Interface (DSI)
Datasheet download datasheet 33793 Datasheet
Additional preview pages of the 33793 datasheet.

📁 Similar Datasheet

  • 33793 - Distributed System Interface (DSI) (NXP)
  • 33793A - Distributed System Interface (DSI) (Freescale Semiconductor)
  • 33790 - Two-Channel Distributed System Interface (DSI) (Freescale Semiconductor)
  • 33797 - Four Channel Squib Driver (Freescale Semiconductor)
  • 33710 - Dual Output DC-DC & Linear Regulator (Freescale Semiconductor)
  • 33730 - Switch Mode Power-Supply (NXP)
  • 33772 - Battery cell controller (NXP)
Other Datasheets by Motorola Inc
  • 33702 - 3.0 A Switch-Mode Power-Supply
  • 33742 - System Basis Chip (SBC)
  • 33742S - System Basis Chip (SBC)

Full PDF Text Transcription

Click to expand full text
Freescale Semiconductor, Inc. MOTOROLA SEMICONDUCTOR TECHNICAL DATA Document order number: MC33793/D Rev 10, 07/2003 33793 Distributed System Interface (DSI) Sensor Interface The 33793 is a slave Distributed System Interface (DSI) device that is optimized as a sensor interface. The device contains circuits to power sensors such as accelerometers and to digitize the analog level from the sensor. The device is controlled by commands over the DSI bus and returns measured data over the bus. DISTRIBUTED SYSTEM INTERFACE (DSI) SENSOR INTERFACE Freescale Semiconductor, Inc... Features • 4-Channel, 8-Bit Analog-to-Digital Converter (ADC) • 4 Pins Configurable as Analog or Logic Inputs or as Logic Outputs • Provides Regulated +5.
Published: |