SA30A Datasheet | Motorola Semiconductor

Features : - Stand-off Zener Voltage Range - 5 to 170 V - Peak Power - 500 Watts @ 1 ms - Maximum Clamp Voltage @ Peak Pulse Current - Low Leakage < 1 µA Above 8.5 Volts - Maximum Temperature Coefficient Specified - Response Time is Typically Less than 1 ns Mechanical Characteristics: CASE: Void-free, transfer-molded, thermosetting plastic FINISH: All external surfaces are corrosion resistant and leads are readily solderable POLARITY: Cathode indicated by polarity band. When operated in zener mode, will be positive with respect to anode MOUNTING POSITION: Any WAFER FAB LOCATION: Phoenix, Arizona ASSEMBLY/TEST LOCATION: Guadalajara, Mexico SA5.0A through SA170A MOSORB ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS 5- 170 VOLT 500 WATT PEAK POWER 3 WATT STEADY STATE CASE 59-04 PLASTIC MAXIMUM RATINGS Rating Peak Power Dissipation (1) @ TL ≤ 25°C Steady State Power Dissipation @ TL ≤ 75°C, Lead Length = 3/8″ Derated above TL = 75°C Forward Surge Current (2) @ TA = 25°C Operating and Storage Temperature Range Lead Temperature not less than 1/16″ from the case for 10 seconds: 230°C NOTES: 1. Nonrepetitive current pulse per Figure 4 and derated above TA = 25°C per Figure 2. NOTES: 2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. Symbol PPK PD Value 500 3 30 Unit Watts Watts m W/°C Amps °C IFSM TJ, Tstg - 55 to +175 Devices listed in bold, italic are Motorola preferred devices. Motorola TVS/Zener Device Data 500 Watt Peak Power Data Sheet 4-1 SA5.0A through SA170A ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) VF = 3.5 V Max, IF- = 35 A (except bidirectional devices). Breakdown Voltage {{VBR{{ (Volts) Device SA5.0A SA6.0A SA6.5A SA7.0A SA7.5A SA8.0A SA8.5A SA9.0A SA10A SA11A SA12A SA13A SA14A SA15A SA16A SA17A SA18A SA20A SA22A SA24A SA26A SA28A SA30A SA33A SA36A SA40A SA43A SA45A SA48A SA51A SA54A SA58A SA60A SA64A SA70A SA75A SA78A SA85A SA90A SA100A SA110A SA120A SA130A SA150A SA160A SA170A Min...