DESCRIPTION
Figure 1-7. BDM Tool Connector — Added NC (no connect) designator to pin 3 Figure 18-16. BDM Tool Connector — Added NC designator to pin 3 Table 14-2. Loop Mode Functions — Corrected table header, third column, from DDRS1 to DDS1 2.0 WOMS bit description, fifth line, changed (via DDRS0/2) to (via DDS0/2) SSOE bit description, second line, changed DDRS7 to DDS7 In the table notes following the SPC0 bit description, corrected bit designators from DDRS4, DDRS5, DDRS6, and DDRS7 to DDS4, DDS5, DDS6, and DDS7. September, 2001 Table 13-3. Prescaler Selection — Added value column and updated prescale factors 19.11 EEPROM Characteristics — Corrected minimum and maximum values for programming and erase times Document type changed from Advance Information to Technical Data reflecting qualification. Figure 3-9. Condition Code Register (CCR) — Reset value for S bit corrected from U to 1 14.2.3.3 SCI Control Register 2 — Removed erroneous reference to Port S bit 3 in the definition for the transmitter enable bit (TE).
Motorola
