MAC15-6FP Datasheet | Motorola Semiconductor

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Triacs Silicon Bidirectional Thyristors . . . designed primarily for full-wave ac control applications, such as solid-state relays, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative gate triggering. - Blocking Voltage to 800 Volts - All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability - Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability - Gate Triggering Guaranteed in Three Modes (MAC15FP Series) or Four Modes (MAC15AFP Series) MAC15FP Series MAC15AFP Series ISOLATED TRIACs THYRISTORS 15 AMPERES RMS 200 thru 800 VOLTS MT2 G MT1 CASE 221C-02 STYLE 3 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Repetitive Peak Off-State Voltage(1) (TJ = - 40 to +125°C, 1/2 Sine Wave 50 to 60 Hz, Gate Open) MAC15-4FP, MAC15A4FP MAC15-6FP, MAC15A6FP MAC15-8FP, MAC15A8FP MAC15-10FP, MAC15A10FP On-State RMS Current (TC = +80°C)(2) Full Cycle Sine Wave 50 to 60 Hz (TC = +95°C) Peak Nonrepetitive Surge Current (One Full Cycle, 60 Hz, TC = +80°C) preceded and followed by rated current Peak Gate Power (TC = +80°C, Pulse Width = 2 µs) Average Gate Power (TC = +80°C, t = 8.3 ms) Peak Gate Current Peak Gate Voltage RMS Isolation Voltage (TA = 25°C, Relative Humidity Operating Junction Temperature Storage Temperature Range Symbol VDRM 200 400 600 800 IT(RMS) ITSM PGM PG(AV) IGM 15 12 150 20 0.5 2 10 1500 - 40 to +125 - 40 to +150 Amps Amps Watts Watt Amps Volts Volts °C °C Value Unit Volts p 20%) VGM V(ISO) TJ Tstg 1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. 2. The case temperature reference...