Datasheet4U Logo Datasheet4U.com

MC100H607 - Registered Hex PECL/TTL Translator

Download the MC100H607 datasheet PDF. This datasheet also covers the MC10H607 variant, as both devices belong to the same registered hex pecl/ttl translator family and are provided as variant models within a single manufacturer datasheet.

Key Features

  • differential PECL inputs for both data and clock. The TTL outputs feature 48mA sink, 24mA source drive capability for driving high fanout loads or transmission lines. The asynchronous master reset control is an ECL level input. With its differential PECL inputs and TTL outputs the H607 device is ideally suited for the receive function of a HPPI bus type board.
  • to.
  • board interface.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MC10H607-Motorola.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MC100H607 Registered Hex PECL/TTL Translator ON Semiconductor
MC100H600 9-Bit TTL/ECL Translator ON Semiconductor
MC100H601 9-Bit ECL/TTL Translator ON Semiconductor
MC100H602 9-Bit Latch TTL/ECL Translator ON Semiconductor
MC100H603 9-Bit Latch ECL/TTL Translator ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC100H600 9-Bit TTL to ECL Translator
MC100H601 9-Bit ECL/TTL Translator
MC100H602 9-Bit Latch TTL/ECL Translator
MC100H603 9-Bit Latch ECL/TTL Translator
MC100H604 Registered Hex TTL/ECL Translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Registered Hex PECL/TTL Translator The MC10H/100H607 is a 6–bit, registered PECL to TTL translator. The device features differential PECL inputs for both data and clock. The TTL outputs feature 48mA sink, 24mA source drive capability for driving high fanout loads or transmission lines. The asynchronous master reset control is an ECL level input. With its differential PECL inputs and TTL outputs the H607 device is ideally suited for the receive function of a HPPI bus type board–to–board interface application. The on chip registers simplify the task of synchronizing the data between the two boards. The device is available in either ECL standard: the 10H device is compatible with MECL 10H™ logic levels, with a VCC of +5.