Datasheet4U Logo Datasheet4U.com

MC10192 - Quad Bus Driver

General Description

ELECTRICAL CHARACTERISTICS (continued) TEST VOLTAGE VALUES (Volts) @ Test Temperature 30°C +25°C +85°C Pin Under Test 8 5 5 2 2 2 5,10,11 2 5,6,10,11 5,6,10,11 5,7,9,10,11 7,9 6 6 5 5 5,6,10,11 VIHmax 0.890 0.810 0.700 VILmin 1.890 1.850

Key Features

  • and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P. O. Box 5405, Denver, Colorado 80217. 303.
  • 675.
  • 2140 or 1.
  • 800.
  • 441.
  • 2447 Mfax™: RMFAX0@email. sps. mot. com.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC10192 Quad Bus Driver ON Semiconductor
MC10195 Hex Inverter/Buffer ON Semiconductor
MC10197 Hex AND Gate ON Semiconductor
MC10198 Monostable Multivibrator ON Semiconductor
MC10101 Quad OR/NOR Gate ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC10192FN Quad Bus Driver
MC10192L Quad Bus Driver
MC10192P Quad Bus Driver
MC10195FN Hex Inverter/Buffer
MC10195L Hex Inverter/Buffer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Quad Bus Driver The MC10192 contains four line drivers with complementary outputs. Each driver has a Data (D) input and shares an Enable (E) input with another driver. The two driver outputs are the uncommitted collectors of a pair of NPN transistors operating as a current switch. Each driver accepts 10K MECL input signals and provides a nominal signal swing of 800 mV across a 50 Ω load at each output collector. Outputs can drive higher values of load resistance, provided that the combination of IR drop and load return voltage VLR does not cause an output collector to go more negative than –2.4 V with respect to VCC. To avoid output transistor breakdown, the load return voltage should not be more positive than +5.5 V with respect to VCC.