Datasheet4U Logo Datasheet4U.com

MC10ELT25 - Differential ECL to TTL Translator

General Description

© Motorola, Inc.

1 REV 2 MC10ELT25 MC100ELT25 MAXIMUM RATINGS Symbol VCC VEE VIN IOUT TA TSTG Parameter DC Supply Voltage (Referenced to GND,

Key Features

  • The VBB output allows the ELT25 to also be used in a single-ended input mode. In this mode the VBB output is tied to the IN input for a non-inverting buffer or the IN input for an inverting buffer. If used the VBB pin should be bypassed to ground via a 0.01µF capacitor. The ELT25 is available in both ECL standards: the 10ELT is compatible with MECL 10H logic levels while the 100ELT is compatible with ECL 100K logic levels. MC10ELT25 MC100ELT25 8 1.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC10ELT25 Differential ECL to TTL Translator ON Semiconductor
MC10ELT20 TTL to Differential PECL Translator ON Semiconductor
MC10ELT21 Differential PECL to TTL Translator ON Semiconductor
MC10ELT22 Dual TTL to Differential PECL Translator ON Semiconductor
MC10ELT24 TTL to Differential ECL Translator ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC10ELT20 TTL to Differential PECL Translator
MC10ELT21 Differential PECL to TTL Translator
MC10ELT22 Dual TTL to Differential PECL Translator
MC10ELT24 TTL to Differential ECL Translator
MC10ELT26 1:2 Fanout Differential PECL to TTL Translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MOTOROLA SEMICONDUCTOR TECHNICAL DATA Differential ECL to TTL Translator The MC10ELT/100ELT25 is a differential ECL to TTL translator. Because ECL levels are used a +5V, -5.2V (or -4.5V) and ground are required. The small outline 8-lead SOIC package and the single gate of the ELT25 makes it ideal for those applications where space, performance and low power are at a premium. Because the mature MOSAIC 1.5 process is used, low cost can be added to the list of features. The VBB output allows the ELT25 to also be used in a single-ended input mode. In this mode the VBB output is tied to the IN input for a non-inverting buffer or the IN input for an inverting buffer. If used the VBB pin should be bypassed to ground via a 0.01µF capacitor.