Datasheet4U Logo Datasheet4U.com

MC12058 - 1.1 GHz Low Power Dual Modulus Prescaler

This page provides the datasheet information for the MC12058, a member of the MC12058D 1.1 GHz Low Power Dual Modulus Prescaler family.

📥 Download Datasheet

Datasheet preview – MC12058

Datasheet Details

Part number MC12058
Manufacturer Motorola
File Size 87.39 KB
Description 1.1 GHz Low Power Dual Modulus Prescaler
Datasheet download datasheet MC12058 Datasheet
Additional preview pages of the MC12058 datasheet.

📁 Similar Datasheet

  • MC120 - Molded Coils (TOKO)
  • MC12012 - MECL Phase-Locked Loop Components (Freescale)
  • MC12026A - 1.1 GHz Dual Modulus Prescaler (ON Semiconductor)
  • MC1203N - LSI PMOS (ETC)
  • MC1203NA - LSI PMOS (ETC)
  • MC1203NB - LSI PMOS (ETC)
  • MC1206 - THICK FILM CHIP RESISTOR (RCD)
  • MC1206 - Multilayer SMD Ceramic Capacitors (Multicomp)
  • MC12060 - (MC12x6x) MTTL (ETC)
  • MC12060 - (MC12060 / MC12061) Crystal Oscillator (Motorola Semiconductor)
Other Datasheets by Motorola
  • MC12052A - MECL PLL COMPONENTS 64/65 / 128/129 LOW POWER DUAL MODULUS PRESCALER
  • MC12053A - 1.1 GHz Super Low Power Dual Modulus Prescaler
  • MC12054A - 2.0 GHz Super Low Power Dual Modulus Prescaler
  • MC12002 - ANALOG MIXER
  • MC12009 - MECL PLL COMPONENTS DUAL MODULUS PRESCALER
  • MC12011 - MECL PLL COMPONENTS DUAL MODULUS PRESCALER
  • MC12012 - MECL PLL COMPONENTS
  • MC12013 - MECL PLL COMPONENTS DUAL MODULUS PRESCALER

Full PDF Text Transcription

Click to expand full text
Order this document by MC12058/D 1.1 GHz Low Power Dual Modulus Prescaler The MC12058 is a low power ÷126/128, ÷254/256 dual modulus prescaler. Motorola’s advanced Bipolar MOSAIC™ V technology is utilized to achieve low power dissipation of 3.0 mW at a minimum supply voltage of 2.7 V. The MC12058 can be operated down to a minimum supply voltage of 2.7 V required for battery operated portable systems. On–chip output termination provides 250 µA (typical) output current to drive a 8.0 pF (typical) high impedance load. The Divide Ratio Control input, SW, permits selection of divide ratio as desired. A HIGH on SW selects ÷126/128; an OPEN on SW selects ÷254/256. The Modulus Control input, MC, selects the proper divide number after SW has been biased to select the desired divide ratio. • 1.
Published: |