Datasheet4U Logo Datasheet4U.com

MC13159 - WIDEBAND FM IF SUBSYSTEM FOR PHS AND DIGITAL APPLICATIONS

General Description

Pin 1 Symbol Mix Decoup VCC 1.0 k 16 Mixin 16 1.0 k 1 Mixer Input Input impedance is about 400 Ω at 240 MHz.

ended matching section at 240 MHz is referenced at application circuit.

Supply Voltage Supply voltage range range is from 2.7 Vdc to 5.5 Vdc.

Key Features

  • s any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC1310 (MC1310 / MC1311) High Speed MegaPixel CMOS Camera mikrotron
MC1310 (MC1306 - MC1330) Mount Lambda
MC13104 (MC13104 / MC13105) 1 Ghz Receiver LNA/Mixer/VCO Freescale Semiconductor
MC13105 (MC13104 / MC13105) 1 Ghz Receiver LNA/Mixer/VCO Freescale Semiconductor
MC1311 (MC1310 / MC1311) High Speed MegaPixel CMOS Camera mikrotron

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC13150 NARROWBAND FM COILLESS DETECTOR IF SUBSYSTEM FOR CELLULAR AND ANALOG APPLICATIONS
MC13155 WIDEBAND FM IF
MC13156 WIDEBAND FM IF SYSTEM
MC13158 WIDEBAND FM IF SUBSYSTEM
MC1315P CBS SQ LOGIC DECODER SYSTEM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Order this document by MC13159/D MC13159 Advance Information Wideband FM IF Subsystem The MC13159 is a wideband FM IF subsystem that is designed for high performance data and digital applications. Excellent high frequency performance is achieved, with low cost, through the use of Motorola’s RF bipolar process. The MC13159 includes a mixer, local oscillator buffer amplifier, IF amplifier, limiter amplifier and RSSI functions. The mixer is useful for a 240 MHz input used in a single–ended/balanced differential configuration. The IF and limiter amplifier are separated so that an external filter can be used in series, or connected directly with an external capacitor. The RSSI output is derived by summing the output of both the IF and Limiter sections.