MC145403 - DRIVER/RECEIVERS

Product Overview

Motorola

Datasheet Details

Part number	MC145403
Manufacturer	Motorola
File Size	266.37 KB
Description	DRIVER/RECEIVERS
Datasheet	MC145403 Datasheet
Additional preview pages of the MC145403 datasheet.

Product details

Description

VCC Digital Power Supply The digital supply pin, which is connected to the logic power supply (+ 5.5 V maximum). 232 E connector (Pin 7) as well as to the logic power supply ground. 5 to 12 V

Features

Drivers.
± 5 to ± 12 V Supply Range 300 Ω Power.
Off Source Impedance Output Current Limiting TTL and CMOS Compatible Inputs Driver Slew Rate Range Limited to 30 V/µs Maximum ± 25 V Input Range 3 to 7 kΩ Input Impedance 0.8 V of Hysteresis for Enhanced Noise Immunity TTL and CMOS Compatible Outputs 24 24 1 20 1 P SUFFIX.

📁 Similar Datasheet

MC145406 - EIA-232-D/V.28 driver/receiver (Philips)
MC145407F - CMOS RS-232C Driver / Receiver (ETC)
MC145415 - Dual Tunable Linear Phase Low Pass Sampled Data Filters (Motorola Semiconductor)
MC14541B - Programmable Timer (ON Semiconductor)
MC145423 - Universal Digital Loop Transceiver (Freescale Semiconductor)
MC14543B - BCD-to-Seven Segment Latch/Decoder/Driver (ON Semiconductor)
MC145450 - 1200 Baud FSK Modem (Motorola Semiconductor)
MC14549B - Successive Approximation Registers (ON Semiconductor)

Other Datasheets by Motorola

MC145402 - Serial 13-Bit Linear Codec
MC145404 - DRIVER/RECEIVERS
MC145405 - DRIVER/RECEIVERS
MC145407 - 5 Volt Only Driver / Recevier
MC145408 - DRIVER/RECEIVERS
MC145412 - Pulse/Tone Repertory Dialer Low Power SIilicon-Gate CMOS

Published: Oct 14, 2006 |