Datasheet4U Logo Datasheet4U.com

MC33169 - GaAs POWER AMPLIFIER SUPPORT IC

General Description

Pin 1 2 3 4 5 6 7 8 9 10 Name C2 Input C1/C2 C1 Input VO Output VO Charge Pump Capacitor + Gnd VO Charge Pump Capacitor

Gate Drive Output Tx Power Control Input Sense Input Pin Description This is the positive pin for the charge pump capacitor in the voltage doubler.

Key Features

  • include an idle mode input and a direct drive of the N.
  • Channel drain switch transistor. This product is available in a 4.0 V version intended for control of the RF Power Amplifier in GSM, DCS1800 and PCS.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC33160 5.0V Voltage Regulator and Supervisory Circuit ON Semiconductor
MC33161 Universal Voltage Monitors ON Semiconductor
MC33163 Step-Up/Down/Inverting Switching Regulators ON Semiconductor
MC33164 5V UNDERVOLTAGE SENSING CIRCUIT Microsemi
MC33164 Micropower Undervoltage Sensing Circuits ON Semiconductor

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC33160 MICROPROCESSOR VOLTAGE REGULATOR/ SUPERVISORY CIRCUIT
MC33161 UNIVERSAL VOLTAGE MONITORS
MC33163 POWER SWITCHING REGULATORS
MC33164 MICROPOWER UNDERVOLTAGE SENSING CIRCUITS
MC33166 POWER SWITCHING REGULATORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Order this document by MC33169/D MC33169 GaAs Power Amplifier Support IC The MC33169 is a support IC for GaAs Power Amplifier Enhanced FETs used in hand–held telephones such as GSM and PCS. This device provides negative voltages for full depletion of Enhanced MESFETs as well as a priority management system of drain switching, ensuring that the negative voltage is always present before turning “on” the Power Amplifier. Additional features include an idle mode input and a direct drive of the N–Channel drain switch transistor. This product is available in a 4.0 V version intended for control of the RF Power Amplifier in GSM, DCS1800 and PCS applications.