Datasheet4U Logo Datasheet4U.com

MC33193 - AUTOMOTIVE DIRECTION INDICATOR

Datasheet Summary

Features

  • 3. This results in a higher clamp voltage across the relay and thus in a faster turn.
  • off. In addition, the lower “on” state supply current is lower on the MC33193 and thus the voltage drop across the ground resistor R3 is reduced. This results in an even higher clamp voltage across the relay. Oscillator.

📥 Download Datasheet

Datasheet preview – MC33193

Datasheet Details

Part number MC33193
Manufacturer Motorola
File Size 121.56 KB
Description AUTOMOTIVE DIRECTION INDICATOR
Datasheet download datasheet MC33193 Datasheet
Additional preview pages of the MC33193 datasheet.

📁 Similar Datasheet

  • MC33198 - HIGH-SIDE TMOS DRIVER (NXP)
  • MC3310 - Motion Processor (ETC)
  • MC33151 - High Speed Dual MOSFET Drivers (ON Semiconductor)
  • MC33152 - HIGH SPEED DUAL MOSFET DRIVERS (ON Semiconductor)
  • MC33153 - Single IGBT Gate Driver (ON Semiconductor)
  • MC33153D - IGBT driver (Art Chip)
  • MC33153P - IGBT driver (Art Chip)
  • MC33157 - Half Bridge Controller and Driver for Industrial Linear Tubes (ON Semiconductor)
  • MC33160 - 5.0V Voltage Regulator and Supervisory Circuit (ON Semiconductor)
  • MC33161 - Universal Voltage Monitors (ON Semiconductor)
Other Datasheets by Motorola
  • MC33192 - MI-BUS INTERFACE STEPPER MOTOR CONTROLLER
  • MC33195 - Standard Quad Low Side Pre-driver with Diagnostic
  • MC33197 - AUTOMOTIVE WASH WIPER TIMER
  • MC33197A - AUTOMOTIVE WASH WIPER TIMER
  • MC33198 - Automotive High Side TMOS Driver
  • MC33199 - ISO 9141 SERIAL LINK DRIVER
  • MC33102 - DUAL SLEEP-MODE OPERATIONAL AMPLIFIER
  • MC33110 - LOW VOLTAGE COMPANDER

Full PDF Text Transcription

Click to expand full text
Order this document by MC33193/D MC33193 Advance Information Automotive Direction Indicator The MC33193 is a new generation industry standard UAA1041 “Flasher”. It has been developed for enhanced EMI sensitivity, system reliability, and improved wiring simplification. The MC33193 is pin compatible with the UAA1041 and UAA1041B in the standard application configuration as shown in Figure 9, without lamp short circuit detection and using a 20 mΩ shunt resistor. The MC33193 has a standby mode of operation requiring very low standby supply current and can be directly connected to the vehicle’s battery. It includes an RF filter on the Fault detection pin (Pin 7) for EMI purposes.
Published: |