Datasheet4U Logo Datasheet4U.com

MC56F8147 - 16-bit Hybrid Controller

Download the MC56F8147 datasheet PDF. This datasheet also covers the MC56F8347 variant, as both devices belong to the same 16-bit hybrid controller family and are provided as variant models within a single manufacturer datasheet.

General Description

in Table 2-2, added note to Table 10-7 and clarified Section 12.3.

Please see http://www.freescale.com/semiconductors for the most current Data Sheet revision.

56F8347 Technical Data, Rev.

Key Features

  • r>.
  • . Operating Modes.
  • . . . . Operation Mode Register.
  • . . . Register.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MC56F8347_Motorola.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MC56F8135 16-bit Digital Signal Controller Freescale Semiconductor
MC56F8155 16-bit Hybrid Controllers Freescale Semiconductor
MC56F81643 digital signal controllers NXP
MC56F81646 digital signal controllers NXP
MC56F81646LVLF 32-bit Digital Signal Controller NXP

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
MC56F8122 16-bit Hybrid Controllers
MC56F8123 16-bit Hybrid Controllers
MC56F8157 16-BIT HYBRID CONTROLLERS
MC56F8322 16-bit Hybrid Controllers
MC56F8323 16-bit Hybrid Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 56F8347/56F8147 Data Sheet Preliminary Technical Data 56F8300 16-bit Hybrid Controllers MC56F8347 Rev. 3.0 10/2004 freescale.com Document Revision History Version History Rev 0 Rev 1.0 Initial release Fixed typos in Section 1.1.3, Replace any reference to Flash Interface Unit with Flash Module, corrected pin number for D14 in Table 2-2, added note to Vcap pin in Table 2-2, corrected thermal numbers for 160 LQFP in Table 10-4,removed unneccessary notes in Table 10-13; corrected temperature range in Table 10-14; added ADC calibration information to Table 10-24 and new graphs in Figure 10-22. Clarification to Table 10-23, corrected Digital Input Current Low (pull-up enabled) numbers in Table 10-5. Removed text and Table 10-2; replaced with note to Table 10-1.