MMUN2111LT1 Datasheet | Motorola Semiconductor

MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MMUN2111LT1/D Bias Resistor Transistor PNP Silicon Surface Mount Transistor with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base-emitter resistor. The BRT eliminates these individual ponents by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SOT-23 package which is designed for low power surface mount applications. - Simplifies Circuit Design - Reduces Board Space - Reduces ponent Count - The SOT-23 package can be soldered using wave or reflow. The modified gull-winged leads absorb thermal stress during soldering eliminating the possibility of PIN 1 damage to the die. BASE - Available in 8 mm embossed tape and reel. Use the (INPUT) Device Number to order the 7 inch/3000 unit reel. Replace “T1” with “T3” in the Device Number to order the 13 inch/10,000 unit reel. MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Rating Collector-Base Voltage Collector-Emitter Voltage Collector Current Total Power Dissipation @ TA = 25°C(1) Derate above 25°C Symbol VCBO VCEO IC PD R1 R2 PIN 3 COLLECTOR (OUTPUT) MMUN2111LT1 SERIES Motorola Preferred Devices PNP SILICON BIAS RESISTOR TRANSISTOR 3 1 2 PIN 2 EMITTER (GROUND) CASE 318-08, STYLE 6 SOT-23 (TO-236AB) Value 50 50 100 - 200 1.6 Unit Vdc Vdc m Adc m W m W/°C THERMAL CHARACTERISTICS Rating Thermal Resistance - Junction-to-Ambient (surface mounted) Operating and Storage Temperature Range Maximum Temperature for Soldering Purposes, Time in Solder Bath Symbol RθJA TJ, Tstg TL Value 625 - 65 to +150 260 10 Unit °C/W °C °C Sec DEVICE MARKING AND RESISTOR VALUES Device MMUN2111LT1 MMUN2112LT1 MMUN2113LT1 MMUN2114LT1...