Datasheet4U Logo Datasheet4U.com

SN54LS366A - 3-STATE HEX BUFFERS

Download the SN54LS366A datasheet PDF. This datasheet also covers the SN54LS365A variant, as both devices belong to the same 3-state hex buffers family and are provided as variant models within a single manufacturer datasheet.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SN54LS365A_MotorolaInc.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
SN54LS366A Hex Bus Driver Texas Instruments

Other Datasheets by Motorola Semiconductor (now NXP Semiconductors)

Part Number Description
SN54LS367A 3-STATE HEX BUFFERS
SN54LS368A 3-STATE HEX BUFFERS
SN54LS374 OCTAL TRANSPARENT LATCH
SN54LS378 OCTAL D FLIP-FLOP
SN54LS379 OCTAL D FLIP-FLOP
SN54LS393 DUAL DECADE COUNTER / DUAL 4-STAGE BINARY COUNTER
SN54LS399 QUAD 2-PORT REGISTER
SN54LS136 QUAD 2-INPUT EXCLUSIVE OR GATE
SN54LS14 SCHMITT TRIGGERS DUAL GATE/HEX INVERTER
SN54LS148 10-LINE-TO-4-LINE AND 8-LINE-TO-3-LINE PRIORITY ENCODERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
3-STATE HEX BUFFERS These devices are high speed hex buffers with 3-state outputs. They are organized as single 6-bit or 2-bit / 4-bit, with inverting or non-inverting data (D) paths. The outputs are designed to drive 15 TTL Unit Loads or 60 Low Power Schottky loads when the Enable (E) is LOW. When the Output Enable (E) is HIGH, the outputs are forced to a high impedance “off” state. If the outputs of the 3-state devices are tied together, all but one device must be in the high impedance state to avoid high currents that would exceed the maximum ratings. Designers should ensure that Output Enable signals to 3-state devices whose outputs are tied together are designed so there is no overlap.