Datasheet4U Logo Datasheet4U.com

TDA1085C - UNIVERSAL MOTOR SPEED CONTROLLER

General Description

The TDA 1085C triggers a triac accordingly to the speed regulation requirements.

Motor speed is digitally sensed by a tachogenerator and then converted into an analog voltage.

Key Features

  • or speed will have high acceleration, excluding the time for V Pin 4 to go from V Pin 6 to two times this value, high acceleration again, up to the moment the motor has reached the set speed value, at which it will stay, see Figure 3. Should a reset happen (whatever the cause would be), the above mentioned successive ramps will be fully reprocessed from 0 to the maximum speed. If VPin 6 = 0, only the high acceleration ramp occurs. To get a real zero speed position, Pin 5 has been designed in suc.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Order this document by TDA1085C/D TDA1085C Universal Motor Speed Controller The TDA1085C is a phase angle triac controller having all the necessary functions for universal motor speed control in washing machines. It operates in closed loop configuration and provides two ramp possibilities. • On–Chip Frequency to Voltage Converter UNIVERSAL MOTOR SPEED CONTROLLER SEMICONDUCTOR TECHNICAL DATA • • • • • • On–Chip Ramps Generator Soft–Start Load Current Limitation Tachogenerator Circuit Sensing Direct Supply from AC Line Security Functions Peformed by Monitor 16 1 16 1 PLASTIC PACKAGE CASE 648 D SUFFIX PLASTIC PACKAGE CASE 751B (SO–16) ORDERING INFORMATION Device TDA1085CD TDA1085C Operating Temperature Range TJ = – 10° to +120°C Package SO–16 Plastic DIP Figure 1.