P6SMB18A
P6SMB18A is Surface Mount Transient Voltage Suppressor manufactured by Multicomp.
- Part of the P6SMB100A comparator family.
- Part of the P6SMB100A comparator family.
P6SMB Series
Features
:
- For surface mounted application in order to optimize board space.
- Low profile package.
- Built-in strain relief.
- Glass passivated junction.
- Excellent clamping capability.
- Fast response time: typically less than 1.0ps from 0 volt to BV minimum.
- Typical IR less than 1µA above 10V.
- High temperature soldering guaranteed: 260°C/10 seconds at terminals.
- Plastic material used carries.
- 600 watts peak pulse power capability with a 10 x 1000µs waveform by 0.01% duty cycle.
SMB/DO-214AA
Dimensions : Inches (Millimetres)
Mechanical Data
Case Terminals Polarity Standard packaging Weight
: Molded plastic : Pure tin plated lead free. : Indicated by cathode band. : 12mm tape (EIA STD RS-481). : 0.093 gram.
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified.
Page <1>
19/05/08 V1.1
P6SMB Series
Type Number
Peak Power Dissipation at TA = 25°C, Tp = 1ms (Note 1) Steady State Power Dissipation Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note 2, 3)
- Unidirectional Only Maximum Instantaneous Forward Voltage at 50.0A for Unidirectional Only (Note 4)
Typical Thermal Resistance (Note 5)
Operating and Storage Temperature Range
Symbol PPK...
