OKI-T36W-W40 Datasheet | Murata

OVERVIEW OKI-T/36W-W40 Series Selectable Output 36-Watt DOSA-SMT DC/DC Converters The OKI-T/36W-W40 are non-isolated Point-of Load (Po L) DC/DC power converters for embedded applications. The module is fully patible with Distributed-power Open Standards Alliance (DOSA) industry-standard specifications (.dosapower .). The wide input range is 19 to 40 Volts DC. Power output is 36 watts at Vout = 12Vdc. Based on fixedfrequency synchronous buck converter switching Typical unit Typic topology, the high power conversion efficient Point of Load (POL) module features an On/Off control. These converters also include under voltage lock out (UVLO), output short circuit protection, overcurrent and over temperature protections. These units are designed to meet all standard UL/EN/IEC 60950-1 safety certifications and Ro HS6 hazardous substance pliance. FEATURES - - - - - - - - - - - - Non-isolated SMT Po L DC/DC power module 19-40Vdc input voltage range Selectable output voltage 5.021-15.5Vdc Up to 3 Amps output Drives 1000 μF ceramic capacitive loads High power conversion efficiency Outstanding thermal derating performance Over temperature and over current protection On/Off control, positive or negative polarity UL/EN/IEC 60950-1 safety (pending) Industry-standard (DOSA) surface-mount package Ro HS-6 hazardous substance pliance Contents Description , Connection Diagram, Photograph Ordering Guide, Model Numbering, Product Labeling Mechanical Specifications, Input/Output Pinout Detailed Electrical Specifications Output Voltage Adjustment, Soldering Guidelines Application Notes Performance Data and Oscillograms Page 1 2 3 4 5 6 9 Connection Diagram +Vin F1 t4XJUDIJOH Controller t'JMUFST t$VSSFOU4FOTF External DC Power Source Trim Open = On Closed = Off (Positive On/Off) mon Figure 1. OKI-T/36W-W40 Reference and Error Amplifier +Vout On/Off Control mon Note: Murata Power Solutions strongly remends an external input fuse, F1. See specifications. .. For full details go to...