CS8818 Datasheet | Myson Technology

FEATURES - Fully patible with USB specification 2.0 - Support full-speed (12M bits/sec) or high-speed (480M bits/sec) devices with multiple configurations and multiple interfaces - Support all USB standard mands, including suspend and resume detection logic - Support USB 2.0 TEST mode features - Supports 5 endpoints - All endpoints share one on-chip 4K bytes SRAM buffer and the size of each endpoint is configurable - Default control endpoints (EP0) with up to 64-byte buffer on either TX or RX direction - An interrupt OUT endpoint (EP1) and an interrupt IN endpoint (EP2) - A bulk OUT endpoint (EP3) and a bulk IN endpoint (EP4): up to 512 bytes data payload for full/high speed bulk endpoint - Unused endpoint can be disabled - Embedded USB 2.0 transceiver - Integrated bit stuffing/unstuffing and stuff error detection - NRZI (Non-Return-to-Zero Inverted) encoding/decoding - USB Mass Storage Class Bulk-Only Specification pliant (Version 1.0) - Support Bus Powered and Self Powered modes - Support multiple LUNs - Automatic detection of Master or Slave ATAPI devices - Support true ATAPI patible interface - plies with ATAPI-7 Specification (PIO mode 0,3,4, Multiword DMA mode 0~2, UDMA mode 0~6) - 8-bit/16-bit Standard PIO mode interface - 16-bit Multiword DMA mode and UDMA mode interface (Ultra 133) - ATAPI bus can be shared with other devices - Embedded 8-bit microprocessor with on-chip 8K x 14 program ROM and optional external 16K x 14 program ROM/Flash memory - Flexible 32-bit I/O interfaces providing maximum versatility with ROM mask changeable firmware - Firmware to support ATAPI CD-ROM/CD-RW/DVD-ROM/DVD-RW is provided - 12MHz external clock input to provide better EMI - Low power with operation voltage 3.3V with 5V tolerance I/O pads - Available in 64-pin LQFP (10mm x 10mm) production package and 128-pin QFP (14mm x 20mm) development package GENERAL DESCRIPTION The CS8818 is a single chip USB (Universal Serial Bus) 2.0 Mass storage class peripheral controller intended...