Datasheet4U Logo Datasheet4U.com

MTD502E - 2 Port 10M/100M Switch

General Description

The MTD502E is a highly integrated, 10M/ 100M two port switch controller with build_in embedded memory.

It supports 2 MII/RMII ports for 10M/100M operation, and both can operate under half or full duplex mode.

Key Features

  • IEEE802.3 and IEEE802.3u compliant.
  • Single chip, low cost, two port switch controller.
  • Build_in embedded memory on chip for packet buffering.
  • Provide 2 MII/RMII (Reduced Media Independent Interface) ports.
  • A flexible MII interface design can directly connect with standard MII or pseudo MII.
  • Support half/full duplex operation per port.
  • Optional back_pressure control for half_duplex mode.
  • Provide “store and forward” sw.

📥 Download Datasheet

Datasheet Details

Part number MTD502E
Manufacturer Myson
File Size 220.48 KB
Description 2 Port 10M/100M Switch
Datasheet download datasheet MTD502E Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MTD5010M Ultra High Speed Photo Diode Marktech Corporate
MTD508 8-port Switch Myson Technology
MTD55N10J3 N-Channel Logic Level Enhancement Mode Power MOSFET CYStech
MTD55N10Q8 N-Channel Logic Level Enhancement Mode Power MOSFET CYStech
MTD5D0C03J4 N- & P-Channel Logic Level Enhancement Mode Power MOSFET CYStech

Other Datasheets by Myson

Part Number Description
MTD505 5 Port 10M/100M Ethernet Switch
MTD516 16 Port 10M/100M Ethernet Switch
MTD214 Ethernet Encoder/Decoder and 10BaseT Transceiver with Built-in Waveform Shaper
MTD392 (MTDxxx) Coaxial Transceiver Interface
MTD393 (MTDxxx) Coaxial Transceiver Interface

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MYSON TECHNOLOGY FEATURES • IEEE802.3 and IEEE802.3u compliant. • Single chip, low cost, two port switch controller. • Build_in embedded memory on chip for packet buffering. • Provide 2 MII/RMII (Reduced Media Independent Interface) ports. • A flexible MII interface design can directly connect with standard MII or pseudo MII. • Support half/full duplex operation per port. • Optional back_pressure control for half_duplex mode. • Provide “store and forward” switching, and forwarding rate at full_wire speed. • Support up to 2048 MAC addresses filtering database, and automatical address aging_out function (300 secs). • Low power CMOS design, with single 3.3V supply voltage, 50 MHZ operation. • Provide 128 pin PQFP package (MTD502EF), and 80 pin LQFP package (MTD502EG).