Datasheet4U Logo Datasheet4U.com

D16311GC - 1/8- to 1/16-DUTY FIPTM VFD CONTROLLER/DRIVER

General Description

Inputs serial data at rising edge of shift clock, starting from lower bit.

Outputs serial data at falling edge of shift clock, starting from lower bit.

This is N-ch open-drain output pin.

Key Features

  • Many display modes (12-segment & 16-digit to 20-segment & 8-digit).
  • Key scanning (12  4 matrices).
  • Dimming circuit (eight steps).
  • High-voltage output (VDD 35 V max).
  • LED ports (5 chs. , 20 mA max).
  • General-purpose input port (4 bits).
  • No external resistor necessary for driver outputs (P-ch open-drain + pull-down resistor output).
  • Serial interface (CLK, STB, DIN, DOUT).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
D1631 Silicon NPN Transistor Toshiba
D1632 2SD1632 Panasonic Semiconductor
D1634 Silicon PNP Triple-Diffused Planar Darlington Type Transistor Panasonic
D16-4148 Switching Diode Array Microsemi Corporation
D16-4150 Switching Diode Array Microsemi Corporation

Other Datasheets by NEC (now Renesas Electronics)

Part Number Description
D16312 UPD16312
D16302GF 40-Bit ROW Driver IC
D16306 High Voltage CMOS Driver
D1615 2SD1615
D1615A 2SD1615A

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET SHEET DATA MOS INTEGRATED CIRCUIT PD16311 1/8- to 1/16-DUTY FIPTM (VFD) CONTROLLER/DRIVER The PD16311 is a FIP (Fluorescent Indicator Panel or Vacuum Fluorescent Display) controller/driver that is driven on a 1/8- to 1/16 duty factor. It consists of 12 segment output lines, 8 grid output lines, 8 segment/grid output drive lines, a display memory, a control circuit, and a key scan circuit. Serial data is input to the PD16311 through a three-line serial interface. This FIP controller/driver is ideal as a peripheral device of a single-chip microcomputer. FEATURES • Many display modes (12-segment & 16-digit to 20-segment & 8-digit) • Key scanning (12  4 matrices) • Dimming circuit (eight steps) • High-voltage output (VDD  35 V max). • LED ports (5 chs., 20 mA max).