Datasheet4U Logo Datasheet4U.com

PS9587 - 8-PIN DIP HIGH-SPEED PHOTOCOUPLER

General Description

The PS9587, PS9587L1, PS9587L2 and PS9587L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip.

Key Features

  • ES.
  • Long creepage distance (8 mm MIN. : PS9587L1, PS9587L2).
  • High common mode transient immunity (CMH, CML = ±15 kV/μs MIN. ).
  • High isolation voltage (BV = 5 000 Vr. m. s. ).
  • High-speed response (10 Mbps).
  • Pulse width distortion (⏐tPHL.
  • tPLH⏐ = 10 ns TYP. ).
  • Open collector output.
  • Ordering number of tape product: PS9587L2-E3: 1 000 pcs/reel : PS9587L3-E3: 1 000 pcs/reel.
  • Pb-Free product.
  • Safety standards.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PS9587 8-PIN DIP HIGH-SPEED PHOTOCOUPLER CEL
PS9587L1 8-PIN DIP HIGH-SPEED PHOTOCOUPLER CEL
PS9587L2 8-PIN DIP HIGH-SPEED PHOTOCOUPLER CEL
PS9587L3 8-PIN DIP HIGH-SPEED PHOTOCOUPLER CEL
PS9505 8-PIN DIP PHOTOCOUPLER Renesas

Other Datasheets by NEC (now Renesas Electronics)

Part Number Description
PS9587L1 8-PIN DIP HIGH-SPEED PHOTOCOUPLER
PS9587L2 8-PIN DIP HIGH-SPEED PHOTOCOUPLER
PS9587L3 8-PIN DIP HIGH-SPEED PHOTOCOUPLER
PS9113 INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER
PS9115 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.DataSheet4U.com PHOTOCOUPLER PS9587,PS9587L1,PS9587L2,PS9587L3 HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP HIGH-SPEED PHOTOCOUPLER −NEPOC FOR CREEPAGE DISTANCE OF 8 mm DESCRIPTION The PS9587, PS9587L1, PS9587L2 and PS9587L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9587L1 and PS9587L2 are designed specifically for long creepage-distance as well as high common mode transient immunity (CMR) and high speed digital output type. Consequently, they are suitable for high speed logic interface that needs long creepage-distance (8 mm) on mounting. The PS9587L1 is lead bending type for long creepage distance.