Datasheet4U Logo Datasheet4U.com

PS9715 - HIGH CMR / 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER

General Description

PS9715 is an optically coupled high-speed, totem pole output isolator containing a GaAIAs LED on the light emitting side (input side) and a photodiode and a signal processing circuit on the light receiving side (output side) on one chip.

LAN/FA MEASUREMENT EQUIPMENT

Key Features

  • HIGH COMMON MODE.

📥 Download Datasheet

Other Datasheets by NEC (now Renesas Electronics)

Part Number Description
PS9711 HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps / TOTEM-POLE OUTPUT TYPE 5-PIN SOP TOM PHOTOCOUPLER
PS9713 1 Mbps / OPEN COLLECTOR OUTPUT / FOR GATE DRIVE INTERFACE INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER
PS9714 NECs HIGH CMR / 10 Mbps OPEN COLLECTOR OUTPUT TYPE 5 PIN SOP OPTOCOUPLER
PS9701 5-PIN SOP PHOTOCOUPLER
PS9113 INTELLIGENT POWER MODULE 5-PIN SOP PHOTOCOUPLER
PS9115 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER
PS9302L HIGH CMR IGBT GATE DRIVE 8-PIN SDIP PHOTOCOUPLER
PS9587 8-PIN DIP HIGH-SPEED PHOTOCOUPLER
PS9587L1 8-PIN DIP HIGH-SPEED PHOTOCOUPLER
PS9587L2 8-PIN DIP HIGH-SPEED PHOTOCOUPLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HIGH CMR, 10 Mbps TOTEM POLE OUTPUT TYPE 5-PIN SOP PHOTOCOUPLER FEATURES • HIGH COMMON MODE TRANSIENT IMMUNITY CMH, CML = ±20 kV/µs TYP • SMALL AND THIN PACKAGE 5-pin SOP • HIGH SPEED 10 Mbps • PULSE WIDTH DISTORTION |tPHL – tPLH| = 7 ns TYP • HIGH ISOLATION VOLTAGE BV = 2500 Vr.m.s. • TOTEM POLE OUTPUT No pull-up resistor required • AVAILABLE IN TAPE AND REEL PS9715-F3, F4: 3500 pcs/reel PS9715 DESCRIPTION PS9715 is an optically coupled high-speed, totem pole output isolator containing a GaAIAs LED on the light emitting side (input side) and a photodiode and a signal processing circuit on the light receiving side (output side) on one chip.