UPB586G Overview
The UPB586 series of devices are silicon bipolar prescalers which can be operated in divide-by-256 or divide-by-512 mode.
UPB586G Key Features
- HIGH FREQUENCY OPERATION TO 2.5 GHz
- WIDE BAND OPERATION
- SINGLE SUPPLY VOLTAGE: VCC = 5 V ±10%
- AVAILABLE IN TAPE AND REEL (G08 PACKAGE)
UPB586G Applications
- Not required if M is grounded. Note: Because of the high internal gain and gain pression of the UPB586, this device is prone to self-oscillation in the absence
- Add a shunt resistor from the RF input line to ground. The blocking capacitor should be between the resistor and the UPB586, but physical separation should be m
- Apply a DC offset voltage of +3.0 volts to the INPUT pin. The voltage source should be isolated from the INPUT pin by a series 1000 ohm resistor
- Apply a DC offset voltage of +1.5 volts to the BYPASS pin. The voltage source should be isolated from the BYPASS pin by a series 1000 ohm resistor. All these ap