Datasheet4U Logo Datasheet4U.com

UPC1934 - DC-DC CONVERTER CONTROL IC

General Description

The µ PC1934 is an IC that controls a low-voltage input DC-DC converter.

This IC is suitable for an operation with 3-V, 3.3-V input or a lithium ion secondary battery input, because the minimum operation supply voltage is 2.5 V.

Key Features

  • Low supply voltage: 2.5 V (MIN. ).
  • Operating voltage range: 2.5 to 20 V (breakdown voltage: 30 V).
  • Timer latch circuit for short-circuit protection.
  • Ceramic capacitor with low capacitance (0.1 µ F) can be used for short-circuit protection.
  • Open drain outputs (Each of the outputs can be used to control a step-down converter, a step-up converter and an inverted converter. ).
  • Can control two output channels.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UPC1008C Phase Frequexcy Detector ETC
UPC1031H UPC1031H ETC
UPC1032H Dual Low Noise Preamplifier Silicon Bipolar Monolithic Intergated Circuit NEC Electronics
UPC1037H Analog IC ETC
UPC1182H 5 Watt Audio Power Amplifier ETC

Other Datasheets by NEC (now Renesas Electronics)

Part Number Description
UPC1933 DC-DC CONVERTER CONTROL IC
UPC1935 DC-DC CONVERTER CONTROL IC
UPC1905 SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION
UPC1906 SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION
UPC1906 SWITCHING REGULATOR CONTROL CIRCUIT FOR 500 kHz OPERATION

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET BiCMOS INTEGRATED CIRCUIT µ PC1934 DC-DC CONVERTER CONTROL IC DESCRIPTION The µ PC1934 is an IC that controls a low-voltage input DC-DC converter. This IC is suitable for an operation with 3-V, 3.3-V input or a lithium ion secondary battery input, because the minimum operation supply voltage is 2.5 V. Because of its wide operating voltage range, it can also be used to control DC-DC converters that use an AC adapter for input. FEATURES • Low supply voltage: 2.5 V (MIN.) • Operating voltage range: 2.5 to 20 V (breakdown voltage: 30 V) • Timer latch circuit for short-circuit protection. • Ceramic capacitor with low capacitance (0.1 µ F) can be used for short-circuit protection.