Datasheet4U Logo Datasheet4U.com

UPC2255 - (UPC2250 Series) Low Staturated Stabilized Power Supply with System Reset Pin

General Description

The µPC2250 series is a collection of low-saturated 4-pin stabilized power supplies with a pin that outputs a reset signal when a drop in the input voltage is detected.

Key Features

  • Low minimum voltage difference between input and output VDIF = 0.15 V TYP. (at IO = 40 mA) Outputs reset signal (active-low) when the input voltage or output voltage drops. Low reverse leakage current during back up IOLK = 1 µA TYP. Low circuit operating current under no load IBIAS = 1.3 mA TYP. PIN.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UPC2002 (UPCxxxx) Industrial Linear IC ETC
UPC2002H Audio Power Amplifier ETC
UPC2500H (UPC250xx) BTL ETC
UPC2502 (UPC250xx) BTL ETC
UPC2505V (UPC250xx) BTL ETC

Other Datasheets by NEC (now Renesas Electronics)

Part Number Description
UPC2260 LOW DROPOUT VOLTAGE REGULATOR
UPC2002 Audio Power Amplifier
UPC2400A THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR
UPC2405AHF THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR
UPC2406AHF THREE TERMINAL LOW DROPOUT VOLTAGE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET SHEET DATA BIPOLAR ANALOG INTEGRATED CIRCUIT µPC2250 SERIES LOW-SATURATED STABILIZED POWER SUPPLY WITH SYSTEM RESET PIN DESCRIPTION The µPC2250 series is a collection of low-saturated 4-pin stabilized power supplies with a pin that outputs a reset signal when a drop in the input voltage is detected. Because the reverse leakage current of these power supplies is about 1 µA even if a voltage is applied to the output pin when the input voltage is cut off, these power supplies are ideal for systems with on-board microprocessors requiring battery backup. FEATURES • • • • Low minimum voltage difference between input and output VDIF = 0.15 V TYP. (at IO = 40 mA) Outputs reset signal (active-low) when the input voltage or output voltage drops.