Datasheet4U Logo Datasheet4U.com

UPD16312 - 1/4- to 1/11-DUTY FIP (VFD) CONTROLLER/DRIVER

General Description

Input serial data at rising edge of shift clock, starting from the low order bit.

Output serial data at the falling edge of the shift clock, starting from low order bit.

This is N-ch open-drain output pin.

Key Features

  • Multiple display modes (11-segment & 11-digit to 16-segment & 4-digit).
  • Key scanning (6  4 matrix).
  • Dimming circuit (eight steps).
  • High-voltage output (VDD 35 V max).
  • LED ports (4 chs. , 20 mA max).
  • General-purpose input port (4 bits).
  • No external resistors necessary for driver outputs (P-ch open-drain + pull-down resistor output).
  • Serial interface (CLK, STB, DIN, DOUT).

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET MOS INTEGRATED CIRCUIT PD16312 1/4- to 1/11-DUTY FIPTM (VFD) CONTROLLER/DRIVER The PD16312 is a FIP (fluorescent Indicator Panel, or Vacuum Fluorescent Display) controller/driver that is driven on a 1/4- to 1/11 duty factor. It consists of 11 segment output lines, 6 grid output lines, 5 segment/grid output drive lines, a display memory, a control circuit, and a key scan circuit. Serial data is input to the PD16312 through a three-line serial interface. This FIP controller/driver is ideal as a peripheral device for a single-chip microcomputer. FEATURES • Multiple display modes (11-segment & 11-digit to 16-segment & 4-digit) • Key scanning (6  4 matrix) • Dimming circuit (eight steps) • High-voltage output (VDD  35 V max). • LED ports (4 chs., 20 mA max).