Datasheet4U Logo Datasheet4U.com

UPD17136A - 4-BIT SINGLE-CHIP MICROCONTROLLER

Download the UPD17136A datasheet PDF. This datasheet also covers the UPD1713xA variant, as both devices belong to the same 4-bit single-chip microcontroller family and are provided as variant models within a single manufacturer datasheet.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (UPD1713xA_NEC.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
UPD17133 (UPD17120 - UPD17133) 4-Bit Single-Chip Microcontroller NEC Electronics
UPD17120 (UPD17120 - UPD17133) 4-Bit Single-Chip Microcontroller NEC Electronics
UPD17121 (UPD17120 - UPD17133) 4-Bit Single-Chip Microcontroller NEC Electronics
UPD1715 Low Voltage Single-Chip Microcomputer NEC Electronics
UPD17051 4-BIT SINGLE-CHIP MICROCONTROLLER NEC Electronics

Other Datasheets by NEC (now Renesas Electronics)

Part Number Description
UPD1713 Consumers-ICs
UPD17132 4-Bit Microcontroller
UPD17134A 4-BIT SINGLE-CHIP MICROCONTROLLER
UPD17135A 4-BIT SINGLE-CHIP MICROCONTROLLER
UPD17137A 4-BIT SINGLE-CHIP MICROCONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
µPD17134A SUBSERIES 4-BIT SINGLE-CHIP MICROCONTROLLER © 1993 µPD17134A µPD17135A µPD17136A µPD17137A µPD17P136A µPD17P137A Document No. U11607EJ3V0UM00 (3rd edition) Date Published December 1996 N Printed in Japan NOTES FOR CMOS DEVICES 1 PRECAUTION AGAINST ESD FOR SEMICONDUCTORS Note: Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and ultimately degrade the device operation. Steps must be taken to stop generation of static electricity as much as possible, and quickly dissipate it once, when it has occurred. Environmental control must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using insulators that easily build static electricity.