Datasheet4U Logo Datasheet4U.com

uPC2709TB - SUPER MINIMOLD SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER

General Description

The µPC2709TB is a silicon monolithic integrated circuits designed as 1st IF amplifier for DBS tuners.

packaged in super minimold package which is smaller than conventional minimold.

version.

Key Features

  • High-density surface mounting : 6-pin super minimold package (2.0 × 1.25 × 0.9 mm).
  • Wideband response : fu = 2.3 GHz TYP. @3 dB bandwidth.
  • Medium output power : PO (sat) = +11.5 dBm@f = 1 GHz with external inductor.
  • Supply voltage : VCC = 4.5 to 5.5 V.
  • Power gain : GP = 23 dB TYP. @f = 1 GHz.
  • Port impedance : input/output 50 Ω.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UPC2709TB SUPER MINIMOLD SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER CEL
UPC2709T 2.5GHz SILICON MMIC WIDE-BAND AMPLIFIER CEL
uPC271 High Performance Comparator Renesas
uPC2710TB SUPER MINIMOLD SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER Renesas
UPC2710TB SUPER MINIMOLD SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER CEL

Other Datasheets by NEC (now Renesas Electronics)

Part Number Description
UPC2709T 5 V / SUPER MINIMOLD SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER
UPC2708T 3 GHz SILICON MMIC WIDE-BAND AMPLIFIER
UPC2708TB 5 V/ SUPER MINIMOLD SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER
UPC271 Precision Voltage Comparators
UPC2710T 1.5 GHz SILICON MMIC WIDE-BAND AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUITS µPC2709TB 5 V, SUPER MINIMOLD SILICON MMIC MEDIUM OUTPUT POWER AMPLIFIER DESCRIPTION The µPC2709TB is a silicon monolithic integrated circuits designed as 1st IF amplifier for DBS tuners. This IC is packaged in super minimold package which is smaller than conventional minimold. The µPC2709TB has compatible pin connections and performance to µPC2709T of conventional minimold version. So, in the case of reducing your system size, µPC2709TB is suitable to replace from µPC2709T. These IC is manufactured using NEC’s 20 GHz fT NESAT™III silicon bipolar process. This process uses silicon nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and prevent corrosion/migration.