Datasheet4U Logo Datasheet4U.com

SC-B1420 - LVCMOS

General Description

The SC-B1420 Series of quartz crystal oscillators provide enable/disable 3-state LVCMOS compatible signals for bus connected systems.

Supplying Pin 1 of the SC-B1420 units with a logic “1” or open enables its Pin 3 output.

In the disable mode, Pin 3 presents a high impedance to the load.

Key Features

  • Size, mm 5x7 I/O 4 pad Supply Voltage 3.3V / 2.5V / 5V.
  • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions.
  • Low jitter - Wavecrest jitter characterization available.
  • Wide frequency range.
  • 1.0 MHz to 80.0 MHz.
  • User specified tolerance available.
  • Will withstand vapor phase temperatures of 253°C for 4 minutes maximum.
  • Space-saving alternative to discrete component oscillators.
  • 2.5 Volt opera.

📥 Download Datasheet

Datasheet Details

Part number SC-B1420
Manufacturer NEL
File Size 220.30 KB
Description LVCMOS
Datasheet download datasheet SC-B1420 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC-B1440 LVCMOS Nel Frequency Controls
SC-01 Votrax CMOS Phoneme Speech Synthesizer Votrax
SC-050-x Common Mode Chokes Premo
SC-060-x Common Mode Chokes Premo
SC-0704-2R2M Inductor Shielded SMD Brightek

Other Datasheets by NEL

Part Number Description
SC-C1420 LVCMOS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com SC-B1420 Series LVCMOS SC-B1420 Series Rev Frequency Range: 1.0 MHz to 80.0 MHz Description The SC-B1420 Series of quartz crystal oscillators provide enable/disable 3-state LVCMOS compatible signals for bus connected systems. Supplying Pin 1 of the SC-B1420 units with a logic “1” or open enables its Pin 3 output. In the disable mode, Pin 3 presents a high impedance to the load. Features Size, mm 5x7 I/O 4 pad Supply Voltage 3.3V / 2.5V / 5V • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions • Low jitter - Wavecrest jitter characterization available • Wide frequency range—1.0 MHz to 80.