NRLM Datasheet | NIC-Components

.. Large Can Aluminum Electrolytic Capacitors Features - NEW SIZES FOR LOW PROFILE AND HIGH DENSITY DESIGN OPTIONS - EXPANDED CV VALUE RANGE Ro HS - HIGH RIPPLE CURRENT - LONG LIFE pliant includes all homogeneous materials - CAN-TOP SAFETY VENT - DESIGNED AS INPUT FILTER OF SMPS - See Part Number System for Details - STANDARD 10mm (.400") SNAP-IN SPACING SPECIFICATIONS Operating Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Max. Leakage Current (µA) After 5 minutes (20°C) W.V. (Vdc) Max. Tan δ at 120Hz/20°C Tan δ max. W.V. (Vdc) S.V. (Vdc) Surge Voltage W.V. (Vdc) S.V. (Vdc) Frequency (Hz) Ripple Current Correction Factors Multiplier at 85°C Temperature (°C) Low Temperature Capacitance Change Stability (10 to 250Vdc) Impedance Ratio Capacitance Change Load Life Test Tan δ 2,000 hours at +85°C Leakage Current Capacitance Change Shelf Life Test 1,000 hours at +85°C Tan δ (no load) Leakage Current Surge Voltage Test Capacitance Change Per JIS-C-5141 (table #6, #4) Tan δ Surge voltage applied: 30 seconds Leakage Current "On" and 5.5 minutes no voltage "Off" Capacitance Change Soldering Effect Refer to Tan δ MIL-STD-202F Method 210A Leakage Current (- 47,000µF add 0.14, 68,000µF add 0.35.) Sleeve Color: Dark Blue Can Top Safety Vent Insulation Sleeve and Minus Polarity Marking 0.8 D+1 Max. (-) (+) D∅ ± 0.5 NRLM Series -40 ~ +85°C 16 ~ 250Vdc 180 ~ 68,000µF ±20% (M) 3x 16 0.50- 16 20 180 220 50 0.75 0 -5% 1.5 C(µF)V -25 ~ +85°C 350 ~ 450Vdc 56 ~ 680µF 25 35 50 63 80 100 160~450 0.40- 0.35 0.30 0.25 0.20 0.20 0.15 25 35 50 63 80 100 160 32 44 63 79 100 125 200 200 250 350 400 450 250 300 400 450 500 60 100 120 500 1K 10K ~ 50K 0.80 0.95 1.00 1.05 1.08 1.15 -25 -40 -15% -30% 3 9 Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Within ±20% of initial measured value Less than 200% of specified maximum value Less than specified maximum value Within...