NSPH104_100V1210TRF Datasheet | NIC

Multilayer Acrylic Polymer Film Capacitors Features - HIGH CAPACITANCE (UP TO 22μF) - WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55°C ~ +125°C or ±105°C) - UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC EFFECT - IDEAL FOR AUDIO APPLICATIONS - TYPICAL OPEN FAILURE MODE - +260°C REFLOW SOLDERING PATIBLE SPECIFICATIONS Capacitance Range Voltage Ratings Capacitance Tolerance Temperature Range Dissipation Factor (20°C) Insulation Resistance (20°C) Dielectric Withstanding Voltage - Measured at < 5Vrms, 1KHz 1206 1210 1812 0.01μF ~ 22μF- 16, 25, 35, 50 & 63VDC Case Sizes 2220 NSPH Series 1206 1210 0.001μF ~ 0.047μF- 0.068μF ~ 0.1μF- 100VDC ±10% (K), ±20% (M) -55°C ~ +105°C -55°C ~ +125°C 1.5% (measured at 5Vrms, 1KHz) C < 0.1μF: 3,000MΩ Minimum 1,000MΩ Minimum C > 0.1μF: 300M - μF Minimum No abnormalities after application of 150% of rated voltage for 1 minute or 175% of rated voltage for 1 ~ 5 seconds ENVIRONMENTAL CHARACTERISTICS High Temperature Life Test- 16V ~ 63V: +125°C ±3°C, 1,000 Hrs +48/-0 Hrs 100V: +105°C ±3°C, 1,000 Hrs +48/-0 Hrs 125% of Rated Voltage Humidity Load Life- 500 Hours, +40°C & 90% ~ 95% RH at rated voltage Temperature Cycling- No Load, 5 cycles of -55°C (30 minutes), Room temperature < 3 minutes +125°C or +105°C (30 minutes) Resistance to Soldering Heat (Soldering using remended reflow conditions, 2 times) Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Within +5%/-20% of Initial Value 1.65% Maximum @ 1KHz 16V ~ 63V, C > 0.1μF: 30MΩ - μF Minimum 16V ~ 63V, C < 0.1μF & 100V: 300MΩ Minimum Within +20%/-5% of Initial Value 2.25% Maximum @ 1KHz 16V ~ 63V, C > 0.1μF: 30MΩ - μF Minimum 16V ~ 63V, C < 0.1μF & 100V: 300MΩ Minimum Within +5%/-20% of Initial Value 1.65% Maximum @ 1KHz 16V ~ 63V, C > 0.1μF:...