NSWC222J100TRB2F Datasheet | NIC

FEATURES NSWC IS - STACKED METALLIZED POLYETHYLENE NAPHTHALATE (PEN) FILM REMENDED - STANDARD EIA 1206, 1210, 1913, 2416, 2820, 3022 AND 3925 SIZES FOR NEW DESIGNS - WIDE TEMPERATURE RANGE UP TO +125OC- - HIGH HEAT AND MOISTURE RESISTANT Ro HS - VERY STABLE TEMPERATURE, FREQUENCY AND VOLTAGE BIAS pliant includes all homogeneous materials n CHARACTERISTICS - REFLOW SOLDERING ONLY - See Part Number System for Details - TAPE AND REEL PACKAGING SPECIFICATIONS Capacitance Range Votage Ratings Capacitance Tolerance Temperature Range Dissipation factor (20°C) Insulation resistance (20°C) Dielectric Withstanding Voltage 1206 0.001 ~ 0.0047μF 1210 0.0056 ~ 0.01μF Case Sizes 1913 2416 2820 3022 3925 0.012 ~ 0.082μF 0.1 ~ 0.15μF 0.18 ~ 0.33μF 0.39 ~ 0.47μF 0.56 ~ 1.0μF 100Vdc 0.001 ~ 0.01μF 5% (J) only, 0.012 ~ 0.15μF 5% (J) or 10% (K), 0.18 ~ 1.0μF 10% (K) only -55°C ~ +105°C (0.001μF ~ 0.01μF) -55°C ~ +125°C (0.012μF ~ 1.0μF with derating above +85°C) 1.0% max. @ 1KHz 3 Gigohms or 1000Ω/F whichever is lower 150% of Rated Voltage 60 Seconds ENVIRONMENTAL CHARACTERISTICS Life Test At +105°C 1,000 Hours at 125% of Rated Voltage (125°C for 0.012μF ~ 1.0μF) Resistance to Soldering Heat: +240°C Peak Humidity Load Life (90% ~ 95% RH) (1) 1,000 Hours, +40°C 500 Hours for 0.012μF ~ 1.0μF (2) 500 Hours, +60°C for 0.001 ~ 0.01μF Solderability with 25% Wt Rosin-Methanol Flux Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Capacitance Change Dissipation Factor Insulation Resistance Within +1%/-6% of Initial Value 1.1% Maximum 1 Gigohm Minimum or 300Ω/F whichever is lower Within ±5% for 0.012 ~ 1.0μF or ±3% for 0.001 ~ 0.01μF of initial value 1.1% Max. for 0.012 ~ 1.0μF or 0.66% Max. for 0.001 ~ 0.01μF 1 Gigohm Minimum or 300Ω/F whichever is lower (1) +8%/-5% (2) ±10% of Initial Value (1) 1.5% Max. (2) 2.0% Max. (1) 100 Megohm Min. or 30Ω/F (2) 10 Megohm Min. or 3Ω/F whichever is lower 90% Minimum Coverage After 2.5...