NEV Datasheet | NTE Electronics

ALUMINUM ELECTROLYTIC 6.3V to 100V NEV, NEH SERIES SUBMINIATURE (NEV: Radial Lead, NEH: Axial Leads) The NEV and NEH series subminiature aluminum electrolytic capacitors are especially suitable for applications requiring high capacitance, low cost, and very small size. In fact, you’ll find these capacitors in some of the most demanding applications, from precision medical electronics and automobiles to the newest personal puters and disk drives. They operate over a broad temperature range and are available in either blister pack or bulk. MECHANICAL SPECIFICATIONS Lead Solderability: Meets the requirements of MIL - STD 202, Method 208 Marking: Consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, vendor identification. Remended Cleaning Solvents: Methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or mercial detergents. Halogenated hydrocarbon cleaning agents such as Freon (MF, TF, or TC), trichloroethylene, trichloroethane, or methylchloride are not remended as they may damage the capacitor. RATINGS Capacitance Range: 0.1µf to 22,000µf Tolerance: ±20% Voltage Range: 6.3V to 100V PERFORMANCE SPECIFICATIONS Operating Temperature Range: - 40°C to +85°C ( - 40°F to +185°F) Leakage Current: I ≤ 0.01CV + 3µA (measured after 3 minutes of applied voltage) I = Leakage Current (µA) C = Nominal Capacitance (µf) V = Rated Voltage (V) Capacitance Tolerance (M): ±20% measured at +20°C (+68°F), 120HZ Dissipation Factor: measured at +20°C (+68°F),120HZ Rated Voltage 0.1µf to 1000µf 1000µf to 22,000µf 6.3 0.24 10 0.2 16 0.17 25 0.15 35 0.12 50 - 80 0.10 100 0.08 CASE SIZE AND DIMENSIONS: NEV SERIES Insulating Sleeve 18.0 Min dØ A ±0.5 L L’ 5.0 Min L’ = L + 1.0 Max at D Ø ≤ 8.0 DØ D’ Ø L’ = L + 2.0 Max at D Ø ≥ 10.0 D’ Ø = D Ø + 0.5 Max Values above plus 0.02 for each 1000µf Impedance Ratio at Low Temperature: 120HZ parison Z WV Z @ - 25°C ( - 13°F)/ Z @ +20°C (+68°F) Z @...