Datasheet4U Logo Datasheet4U.com

NTE926 - Integrated Circuit Quad Timer

General Description

The NTE926 quad timer is a monolithic timing device which can be used to produce four independent timing functions.

The NTE926 output sinks current.

from microseconds to hours.

Key Features

  • D 100mA Output Current per Section D Edge.
  • triggered (No Coupling Capacitor) D Output Independent of Trigger Conditions D Wide Supply Voltage Range 4.5V to 18V D Timer Intervals from Microseconds to Hours D Time Period Equals RC.

📥 Download Datasheet

Datasheet Details

Part number NTE926
Manufacturer NTE Electronics (defunct)
File Size 23.39 KB
Description Integrated Circuit Quad Timer
Datasheet download datasheet NTE926 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTE91 Silicon Complementary Transistors NTE
NTE917 Integrated Circuit NTE
NTE93 Silicon Complementary Transistors NTE
NTE954 4-Terminal Negative Adjustable Voltage Regulator NTE
NTE-247 Silicon Complementary Transistors Darlington Power Amplifier NTE

Other Datasheets by NTE Electronics (defunct)

Part Number Description
NTE92 Silicon Complementary Transistors Hi-Fi Power Amp / Audio Ourtput
NTE9200 4-Lead SIP / Frequency Divider
NTE922 Integrated Circuit Voltage Comparator
NTE922M Integrated Circuit Voltage Comparator
NTE922SM Integrated Circuit Voltage Comparator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NTE926 Integrated Circuit Quad Timer Description: The NTE926 quad timer is a monolithic timing device which can be used to produce four independent timing functions. The NTE926 output sinks current. This highly stable, general purpose controller can be used in a monostable mode to produce accurate time delays–from microseconds to hours. In the time delay mode of operation, the time is precisely controlled by one external resistor and one capacitor. A stable operation can be achieved by using two of the four timer sections. The four timer section in the NTE926 are edge–triggered, therefore, when connected in tandem for sequential timing applications, no coupling capacitors are required. Output current capability of 100mA is provided in both devices.