Datasheet4U Logo Datasheet4U.com

NTE1832 - BTL Audio Power Amplifier

Description

The NTE1832 is an audio power amplifier designed for use in consumer applications.

This IC uses a BTL system in which output coupling capacitors are not necessary and 12W output can be obtained.

Lead SIP style package which greatly simplifies the construction

Features

  • D Suitable for High Performance Car.
  • Audio Power Amplifier. D High Power: POUT = 12W Typ (VCC = 13.2V, f = 1kHz, THD = 10%, RL = 4Ω) D Built in Protector Circuit Thermal Shut Down, Over Voltage Protector (VCC = 24V Typ) ASO Protector (RL Short, Out to GND, Out to VCC) D Operating Supply Voltage Range: VCC = 9V to 18V Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Peak Supply Voltage (0.2 sec), VCCsurge.

📥 Download Datasheet

Datasheet Details

Part number NTE1832
Manufacturer NTE Electronics (defunct)
File Size 76.00 KB
Description BTL Audio Power Amplifier
Datasheet download datasheet NTE1832 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NTE1012 Integrated Circuit Module - Hybrid NTE Electronics
NTE1026 Integrated Circuit Module NTE Electronics
NTE1039 Integrated Circuit FM IF Amplifier NTE Electronics
NTE1052 Integrated Circuit Low Noise Preamp NTE Electronics
NTE1053 Integrated Circuit AF High Gain Preamplifier NTE Electronics

Other Datasheets by NTE Electronics (defunct)

Part Number Description
NTE183 Silicon Complementary Transistors
NTE1830 Integrated Circuit Dual Audio Power Amplifier
NTE1831 Integrated Circuit Dual Audio Power Amplifier
NTE1834 Integrated Circuit Dual Reversible Motor Driver
NTE1835 Integrated Circuit Interface

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NTE1832 Integrated Circuit BTL Audio Power Amplifier, 12W Description: The NTE1832 is an audio power amplifier designed for use in consumer applications. This IC uses a BTL system in which output coupling capacitors are not necessary and 12W output can be obtained. The NTE1832 is available in a 7−Lead SIP style package which greatly simplifies the construction of a power amplifier both in design and assembly. Features: D Suitable for High Performance Car−Audio Power Amplifier. D High Power: POUT = 12W Typ (VCC = 13.
Published: |