NTE1930 Datasheet | NTE Electronics

Description : The NTE1928 is an adjustable positive voltage regulator in an 8- Lead DIP type package that features fast response to both load and line transients, freedom from oscillations with varying resistive and reactive loads, and the ability to start reliabity on any load within rating. This device also contains a biasing circuitry that removes any minimum load current requirement and at the same time reduces standby current drain, permitting higher voltage operation. Features : D Output Voltage Adjustable from 5V to 37V D Output Currents in Excess of 10A Possible by Adding External Transistors D Load Regulation Better than 0.1%, Full Load with Current Limiting D DC Line Regulation Guaranteed at 0.03%/V D Ripple Rejection on 0.01%V Absolute Maximum Ratings: Input Voltage - - - - - - - - - - - - - - 40V Input- Output Differential - - - - - - - - - - - - 40V Power Dissipation (Note 1), PD - - - - - - - - - - . . 400m W Operating Temperature Range, Topr - - - - - - - - . . - 0° to +70°C Storage Temperature Range, Tstg - - - - - - - - . . - 65° to +150°C Lead Temperature (During Soldering, 10 seconds), TL - - - - - - . +260°C Typical Thermal Resistance, Junction- to- Ambient, Rth JA - - - - - . . 140°C/W Note 1. The maximum junction temperature of the NTE1930 is 100°C. For operation at elevated temperatures, this device must be derated based on a thermal resistance of 138°C/W junction to ambient, or 25°C/W junction to case. Electrical Characteristics (Note 2) Parameter Input...