NTE2054 Datasheet | NTE Electronics

Description : The NTE2054 is an I2L monolithic Analog to Digital converter in a 16- Lead DIP type package that provides a 3- digit multiplexed BCD output. This device, when used with an NTE2032 BCD- to- Seven- Segment Decoder/Driver and a minimum of external parts, implements a plete 3- digit display. Features : D Dual- Slope A/D Conversion D Multiplexed BCD Display D Ultra- Stable Internal Band- Gap Voltage Reference D Capable of Reading 99m V below GND with a Single Supply D Differential Input D Internal Timing - No External Clock Required D Choice of Low- Speed (4Hz) or High- Speed (96Hz) Conversion Rate D “Hold” Inhibits Conversion but Maintains Delay Absolute Maximum Ratings: DC Supply Voltage (between Pin7 and Pin14), V+ - - - - - - - . . . +7V Input Voltage (Pin10 or Pin11 to GND), VI - - - - - - - - . . . . ±15V Device Dissipation (Up to TA = +55°C), PD - - - - - - - - . . 750m W Derate Linearly Above TA = +55°C - - - - - - - - 7.9m W/°C Operating Temperature Range, TA - - - - - - - - - 0° to +75°C Storage Temperature Range, Tstg - - - - - - - - . . - 65° to +150°C Lead Temperature, TL (During Soldering, 1/16 ±1/32 in. (1.59 ±0.79mm) from case for 10sec Max) - . +265°C Electrical Characteristics: (TA = +25°C, V+ = 5V, Zero pot centered, gain pot = 2.4kΩ unless otherwise specified) Parameter Operating Supply Voltage Range Supply Current Input Impedance Input Bias Current Unadjusted Zero Offset Unadjusted Gain Linearity Conversion Rate Slow Mode Fast Mode Conversion Control Voltage (Hold Mode) at Pin6 mon- Mode Input Voltage Range BCD Sink Current at Pin1, Pin2, Pin15, and Pin16 Digit...