Datasheet4U Logo Datasheet4U.com

74LVC1G99 - Ultra-configurable multiple function gate

General Description

The 74LVC1G99 provides a low voltage, ultra-configurable, multiple function gate with 3-state output.

The device can be configured as one of several logic functions including, AND, OR, NAND, NOR, XOR, XNOR, inverter, buffer and MUX.

Key Features

  • Wide supply voltage range from 1.65 V to 5.5 V 5 V tolerant inputs for interfacing with 5 V logic High noise immunity Complies with JEDEC standard: ‹ JESD8-7 (1.65 V to 1.95 V) ‹ JESD8-5 (2.3 V to 2.7 V) ‹ JESD8-B/JESD36 (2.7 V to 3.6 V) ESD protection: ‹ HBM JESD22-A114F exceeds 2000 V ‹ MM JESD22-A115-A exceeds 200 V ±24 mA output drive (VCC = 3.0 V) CMOS low power consumption Latch-up performance exceeds 250 mA Direct interface with TTL levels Inputs ac.

📥 Download Datasheet

📁 Similar Datasheet

Brand Logo Part Number Description Manufacturer
nexperia Logo 74LVC1G99 Ultra-configurable multiple function gate nexperia

More Datasheets from NXP Semiconductors

Part Number Description
74LVC1G125 Bus buffer/line driver
74LVC1G157 Single 2-input multiplexer
74LVC1G175 Single D-type flip-flop
74LVC1G3157 2-channel analog multiplexer/demultiplexer
74LVC1G38 2-input NAND gate
74LVC1G386 3-input EXCLUSIVE-OR gate
74LVC1G74 Single D-type flip-flop
74LVC1G79 Single D-type flip-flop positive-edge trigger
74LVC1G86 2-input EXCLUSIVE-OR gate
74LVC16244A 16-bit buffer/line driver

Full PDF Text Transcription for 74LVC1G99 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for 74LVC1G99. For precise diagrams, tables, and layout, please refer to the original PDF.

View original datasheet text
74LVC1G99 Ultra-configurable multiple function gate; 3-state Rev. 04 — 16 April 2010 www.DataSheet4U.com Product data sheet 1. General description The 74LVC1G99 provides a low voltage, ultra-configurable, multiple function gate with 3-state output. The device can be configured as one of several logic functions including, AND, OR, NAND, NOR, XOR, XNOR, inverter, buffer and MUX. No external components are required to configure the device as all inputs can be connected directly to VCC or GND. The 3-state output is controlled by the output enable input (OE). A HIGH level at OE causes the output (Y) to assume a high-impedance OFF-state. When OE is LOW, the output state is determined by the signals applied to the Schmitt-trigger inputs (A, B, C and D).