Datasheet4U Logo Datasheet4U.com

ADC1113D125 - Dual 11-bit ADC

General Description

The ADC1113D125 is a dual-channel 11-bit Analog-to-Digital Converter (ADC) optimized for high dynamic performances and low power at sample rates of 125 Msps.

Key Features

  • SNR, 66.5 dBFS; SFDR, 86 dBc.
  • Sample rate: 125 Msps.
  • Clock input divider by 2 for less jitter contribution.
  • 3 V, 1.8 V single supplies.
  • Flexible input voltage range: 1 V to 2 V (peak-to-peak).
  • Two configurable serial outputs.
  • INL ± 1.25 LSB; DNL ± 0.25 LSB.
  • Pin compatible with the ADC1213D series.
  • HVQFN56 package.
  • Input bandwidth, 600 MHz.
  • Power dissipation, 1270 mW.
  • SPI register programm.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADC111 Single & Dual Output DC/DC Converters MPS Industries
ADC1100 Dual Slope A/D Converter Analog Devices
ADC1105 Dual Slope A/D Converter Analog Devices
ADC112 Single & Dual Output DC/DC Converters MPS Industries
ADC113 Single & Dual Output DC/DC Converters MPS Industries

Other Datasheets by NXP Semiconductors

Part Number Description
ADC1115S125 Single 11-bit ADC
ADC1002S020 Single 10 bits ADC
ADC1003S030 Single 10-bits ADC
ADC1003S040 Single 10-bits ADC
ADC1003S050 Single 10-bits ADC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADC1113D125 Dual 11-bit ADC; serial JESD204A interface Rev. 02 — 23 April 2010 www.DataSheet4U.com Preliminary data sheet 1. General description The ADC1113D125 is a dual-channel 11-bit Analog-to-Digital Converter (ADC) optimized for high dynamic performances and low power at sample rates of 125 Msps. Pipelined architecture and output error correction ensure the ADC1113D125 is accurate enough to guarantee zero missing codes over the entire operating range. Supplied from a 3 V source for analog and a 1.8 V source for the output driver, it embeds two serial outputs. Each lane is differential and complies with the JESD204A format. An integrated Serial Peripheral Interface (SPI) allows the user to easily configure the ADC.