Datasheet4U Logo Datasheet4U.com

DAC1405D750 - Dual 14-bit DAC

Datasheet Summary

Description

The DAC1405D750 is a high-speed 14-bit dual channel Digital-to-Analog Converter (DAC) with selectable 4× or 8× interpolating filters optimized for multi-carrier wireless transmitters.

Features

  • Dual 14-bit resolution.
  • IMD3: 76 dBc; fs = 737.28 Msps; fo = 140 MHz 750 Msps maximum update rate.
  • ACPR: 71 dBc; 2-carrier WCDMA; fs = 737.28 Msps; fo = 153.6 MHz Selectable 4× or 8× interpolation filters.
  • Typical 1.2 W power dissipation at 4× interpolation, PLL off and 740 Msps Input data rate up to 185 Msps.
  • Power-down and Sleep modes Very low noise.

📥 Download Datasheet

Datasheet preview – DAC1405D750

Datasheet Details

Part number DAC1405D750
Manufacturer NXP Semiconductors
File Size 371.73 KB
Description Dual 14-bit DAC
Datasheet download datasheet DAC1405D750 Datasheet
Additional preview pages of the DAC1405D750 datasheet.

📁 Similar Datasheet

  • DAC1405D750 - Dual 14-bit DAC (IDT)
  • DAC1405D650 - Dual 14-bit DAC (IDT)
  • DAC1401D125 - Dual 14-bit DAC (IDT)
  • DAC1403D160 - Dual 14-bit DAC (IDT)
  • DAC1408 - 8 Bit Multiplying D/A Converter (Fairchild)
  • DAC1408A - 8 Bit Multiplying D/A Converter (Precision Monolithics)
  • DAC1408D650 - Dual 14-bit DAC (IDT)
  • DAC1408D650 - Dual 14-bit DAC (NXP)
  • DAC14135 - 14-bit/ 135MSPS D/A Converter (National Semiconductor)
  • DAC10 - 10-Bit High Speed Multiplying D/A Converter Universal Digital Logic Interface (Analog Devices)
Other Datasheets by NXP Semiconductors

Full PDF Text Transcription

Click to expand full text
DAC1405D750 Rev. 01 — 10 March 2010 www.DataSheet4U.com Dual 14-bit DAC, up to 750 Msps; 4× and 8× interpolating Preliminary data sheet 1. General description The DAC1405D750 is a high-speed 14-bit dual channel Digital-to-Analog Converter (DAC) with selectable 4× or 8× interpolating filters optimized for multi-carrier wireless transmitters. Thanks to its digital on-chip modulation, the DAC1405D750 allows the complex I and Q inputs to be converted from BaseBand (BB) to IF. The mixing frequency is adjusted via a Serial Peripheral Interface (SPI) with a 32-bit Numerically Controlled Oscillator (NCO) and the phase is controlled by a 16-bit register. Two modes of operation are available: separate data ports or a single interleaved high-speed data port.
Published: |