Datasheet4U Logo Datasheet4U.com

NX3L1G66 - Low-voltage analog switch

General Description

The NX3L1G66 is a low-ohmic single-pole single-throw analog switch.

It has two input/output terminals (Y and Z) and an active HIGH enable input pin (E).

When E is LOW, the analog switch is turned off.

Key Features

  • Wide supply voltage range from 1.4 V to 4.3 V.
  • Very low ON resistance (peak):.
  • 1.6  (typical) at VCC = 1.4 V.
  • 1.0  (typical) at VCC = 1.65 V.
  • 0.55  (typical) at VCC = 2.3 V.
  • 0.50  (typical) at VCC = 2.7 V.
  • 0.50  (typical) at VCC = 4.3 V.
  • High noise immunity.
  • ESD protection:.
  • HBM JESD22-A114F Class 3A exceeds 7500 V.
  • MM JESD22-A115-A exceeds 200 V.
  • CDM AEC-Q100-011 revision B exceeds 1000 V.
  • IEC61000-4-2 contact discharge exce.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NX3L1G66-Q100 Low-ohmic single-pole single-throw analog switch NXP
NX3L1G3157-Q100 Low-ohmic single-pole double-throw analog switch NXP
NX3L1G384 Low-ohmic single-pole single-throw analog switch NXP
NX3L1G53 Low-ohmic Single-pole Double-throw Analog Switch NXP
NX3L1T384 Single-pole Single-throw Analog Switch NXP

Other Datasheets by NXP Semiconductors

Part Number Description
NX3L1G3157 Low-ohmic single-pole double-throw analog switch
NX3L1T3157 Low-ohmic single-pole double-throw analog switch
NX3L1T5157 Low-ohmic single-pole double-throw switch
NX3L2G384 Dual low-ohmic single-pole single-throw analog switch
NX3L2T66 Dual low-ohmic single-pole single-throw analog switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NX3L1G66 Low-ohmic single-pole single-throw analog switch Rev. 8 — 9 November 2011 Product data sheet 1. General description The NX3L1G66 is a low-ohmic single-pole single-throw analog switch. It has two input/output terminals (Y and Z) and an active HIGH enable input pin (E). When E is LOW, the analog switch is turned off. Schmitt trigger action at the enable input (E) makes the circuit tolerant to slower input rise and fall times. The NX3L1G66 allows signals with amplitude up to VCC to be transmitted from Y to Z; or from Z to Y. Its low ON resistance (0.5 ) and flatness (0.13 ) ensures minimal attenuation and distortion of transmitted signals. 2. Features and benefits  Wide supply voltage range from 1.4 V to 4.3 V  Very low ON resistance (peak):  1.6  (typical) at VCC = 1.