Datasheet4U Logo Datasheet4U.com

NX3L1T5157 - Low-ohmic single-pole double-throw switch

General Description

The NX3L1T5157 provides one low-ohmic single-pole double-throw analog switch, suitable for use as an analog or digital multiplexer/demultiplexer.

It has a digital select input (S) with Schmitt trigger action, two independent inputs/outputs (Y0, Y1) and a common input/output (Z).

Key Features

  • I Wide supply voltage range from 1.4 V to 3.6 V I Very low ON resistance (peak): N 1.6 Ω (typical) at VCC = 1.4 V N 1.0 Ω (typical) at VCC = 1.65 V N 0.55 Ω (typical) at VCC = 2.3 V N 0.50 Ω (typical) at VCC = 2.7 V I Break-before-make switching I High noise immunity I ESD protection: N HBM JESD22-A114E Class 3A exceeds 7500 V N MM JESD22-A115-A exceeds 200 V N CDM AEC-Q100-011 revision B exceeds 1000 V I CMOS low-power consumption I Latch-up performance exceeds 100 mA per JESD 78 Class II Level.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NX3L1T53 Low-ohmic Single-pole Double-throw Analog Switch NXP
NX3L1T384 Single-pole Single-throw Analog Switch NXP
NX3L1T66 Low-ohmic Single-pole Single-throw Analog Switch NXP
NX3L1G3157-Q100 Low-ohmic single-pole double-throw analog switch NXP
NX3L1G384 Low-ohmic single-pole single-throw analog switch NXP

Other Datasheets by NXP Semiconductors

Part Number Description
NX3L1T3157 Low-ohmic single-pole double-throw analog switch
NX3L1G3157 Low-ohmic single-pole double-throw analog switch
NX3L1G66 Low-voltage analog switch
NX3L2G384 Dual low-ohmic single-pole single-throw analog switch
NX3L2T66 Dual low-ohmic single-pole single-throw analog switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NX3L1T5157 Low-ohmic single-pole double-throw switch Rev. 01 — 16 September 2008 www.datasheet4u.com Product data sheet 1. General description The NX3L1T5157 provides one low-ohmic single-pole double-throw analog switch, suitable for use as an analog or digital multiplexer/demultiplexer. It has a digital select input (S) with Schmitt trigger action, two independent inputs/outputs (Y0, Y1) and a common input/output (Z). Schmitt trigger action at the select input (S) makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 1.4 V to 3.6 V. A low input voltage threshold allows pin S to be driven by lower level logic signals without a significant increase in supply current ICC. This makes it possible for the NX3L1T5157 to switch 3.6 V signals with a 1.